Mizan84

Thanks for the help, will see if I can find the right wire.

Can't anyone help me, can someone tell me if this is a good or bad idea? I was planning on doing this by this week. Should I have posted this in the IS200/IS300 Clud forum?

Hi, had this problem for some time, but been too lasy to do anything till now :P .I have a Sony aftermarket headunit installed into my IS200 Sport with an amp bypass cable.

The problem is the Sony headunit display does not dim automatically when I switch the headlight on like it use to in my last car. The display is very bright and is very annoying when driving at night. The only way to dim it is via the remote control but I have to put it back onto "bright" mode during the day or I can't see the display. I have checked the cables and found that the amp bypass cable does not have any connection for the auto dim function to work . Can anyone tell me if there is a wire I can connect to to get the auto dim funtion back on.

If possible I would like the headunit to dim only when the headlight is switched on instead of the sidelight (I have my sidelight on whenever visibility is a bit "poor") . I know which wire on the headunit to connrct to (all the wires are labled on the headunit). I was thinking of connecting to the headlight wire comming from the steering wheel stalt control, if you know what I mean , as I dont use the auto headlight function on the car (got some HIDs which don't work well when I have the auto headlight function) and I dont want the headunit to dim every time I give way to some one (which is alot ).

Thanks for reading and hopfully someone can point me in the right direction.

My car is a manual as well. Befor I used to put the key in and try to start the car straight away, when I tried to start to engine it used to turn but some time the engine didnt start fully as if the engine was flooded. As I said befor the 10 second wait helped alot, it was not the immobiliser as the engine turned and sounded like it tried to start (but it didnt sound "painful") and the immobiliser light was not flashing.

I used to have a problem like that. I have had my car for almost 3 years, and from the beginning about one in every three "cold" start the car would not start on first try. For the last one year I now leave the car on the "ON" position for at least 10 second befor trying to start it and I never had any more problem.

Can someone tell me if those clips (and what size) will work for the boot trim, as I lost a few of them.

Thanks

I have a boot lip on my lexus and I want to swap it to a spoiler type. My car is plat ice but has gold badges on it which I want to keep. If you dont mind swaping badges I will be intrested. I can post picture when i get home as im posting from my phone.

Sounds good. Put up some pictures please.

You got PM B)

I have a boot lip on my lexus and I want to swap it to a spoiler type. My car is plat ice but has gold badges on it which I want to keep. If you dont mind swaping badges I will be intrested. I can post picture when i get home as im posting from my phone.

I had the same problem when I changed the water pump on my IS200 to a non original water pump (I did it the same time as the timing belt). Was losing about 1 liter of coolant in 24 hours. Tried refitting the water pump two time using new gasket and gasket sealant (and lots of coolant) each time with no help. I then got a new original Lexus water pump and not a leak since and got a refund on the non original water pump. So find out what make of water pump was fitted as that might be it.

I might want one in black, but how much are we looking at price?

Changed my standard headunit the an after market one about 6 months ago (because the standard one didn't work properly), my built in sat nav stoped working, someone offered to build a "box" to fix it but never heard of him again. I am now hoping to try again to see if some one can help me. I have a mate who is good at making circuit board so he can even make me one if he knows what to make. If any one can help me, it will make me a very happy man. Thanks

Help please.

I just changed the water pump (+ gasket) along with the cam-belt, tensioner and idler on my car a few days ago as it's done almost 100k and has not been done.

After putting the new water pump and cam-belt kit on every thing was running OK except the water pump was leaking a bit (from about a drop every 5 second to about 10 drops a second) round the seal. So I changed the gasket and put some sealant round the new gasket and tried again but the new water pump is still leaking. Now I don’t know what to do, do I buy another sealant and try again or put the old water pump back on as it was not in such a bad condition. The water pump was not a official Lexus part.

Thanks for any help.

I also need help on this as well.

I would like to know this as well please.

I'm no expert but it sounds to me like the coolent is over heating, most probly your thermostat is the problem.

When steam/smoke was comming from under the bonnet was your temperature gauge working normally or did it show an abnormal temperture (very high or very low) and did the radiator feel hot or cold (if you checked). If the temperature gauge was very high and/or the radiator was very hot did the radiator fan switch on?

Trust me I checked, there are some IS with no boot light :duh: . I spent ages (while feeling stupid) looking in my boot trying to find the light bulb or even a socket. Even went to a Lexus dealer (feeling even more stupid) for them to look for almost 30 mins to say that there is no boot light, not even the wireing for a boot light (they looked very confused). That is when I found out from this forum that there are a few IS owners with no boot light.

So far my best idea is to put a LED strip in the boot connected to the inside cabin light so that it lights up when I unlock the car (for a few second) or open one of the door, but I dont know which wire to connect to and even then the boot light will not light up automaticly.

Does anyone know how the boot light is connected in a normal IS which I can try to copy into my IS?

Thanks

What year did they change to the flat type mirror ?

I changed my mirror two months ago.

Edited I read the question wrong.

I think the flat type and curve type was out from the start as it writen about both in my manual. My car has a reversing sensor, that might have something to do with it. But It's just a theory.

My X reg IS 200 Sport came with no boot light and I want to fit a boot light and thought that if anyone had any idea how I can do it so it lights up automatic when I open the boot lid. Thanks for the any advise.

I had a curve mirror in my X reg IS 200 Sport, I had so much trouble parking it and I'm a driving instructer. I got a flat type from eBay (phoned the seller to find out) and It's so easy to park it now. Changing the mirror was easy, there are two screws under a plastic cover (which just clips off) and It's a simple swap.

Edit: You can buy a flat mirror from the dealer for about £50 which is ok price imo as some eBay sellers are selling Lexus mirror for about £40. I got mine for £30 for the mirror and other bits.

All PM's replied too guys :D

Templates will be sent off for a quote tomorrow and will post up when i have a final price. Then if everything goes to plan they should be made up and posted out in about 5-6 days :D

Sorry for the delay in sorting this out...........

Jason :D

I can't find a reply, what am i doing wrong.

Jason you got PM :D

Im happy to just lock this down and start getting things underway if people want as this is starting to drag

But up to people? It may take me a little time to work through these as i have just started back at work and im not back to full health yet and feel quite tired but as before im determined to get everyone what they want!

1 Dimitris Model: is200 Speedo: XE-02 TRansmission: Manual Design: TTE Compressor

2 Asi

3 LexusLegend Model: IS200 Sport Speedo: XE-01 Transmission: Manual Design: Rising Sun

4 Phil67

5 Iceman2010

6 lexdavis Model: IS200 SE Speedo: XE-01 Transmission: Manual Design: Rising Sun

7 DaveEdin Model: Is200 Speedo: XE-03 Transmission: Manual Design: Sport

8 deckie77 Model: IS200 Speedo: XE-03 Transmission: Manual Design: Sport

9 Garysean

10 Fredrico Model: is200 Speedo: XE-02 Transmission: Manual Design: rising sun

11 Tonz13 Model: IS200 Speedo: XE-01 transmission: Manual Design: TRD

12 Mizan84 model: IS200 Speedo: XE-01 transmission: Manual? Design: Sport

Jason :D

Hi, just to let you know that my car is a manual transmission. Also is the stainless steel clock cover included, if not how much extra will it be if I wanted one. Thanks

Sorry for the delay in sorting this out guys. As Dave mentioned i have been away for a week in Wales. Im now back and will be sorting these out this week coming.

@ Mizan84, i can get the trd or the sport, basically any design you have seen i can do, what with them all being my designs anyway :D Its not too late to join, Once everyone on the list has been sorted i will close this group buy.

Jason :D

Yes please, if you can put me in for a Sport version that will make me very happy, thanks. Just let me know when you want the payment.

Hi, I'm kinda new to LOC (long time member, first time posting). I have been looking for one of these for some time, is it too late to ask for the XE-01 TRD kit for my X reg IS200 Sport manual. I would of liked a Sport dial kit but can't find one anywere online. Thanks