deandavy

Has anyone done this on here like the us spec is300 if so would you be kind enough to point me in the direction of a wiring diagram or show me how youve done yours... obviously I know its got to run less power and most probably through a resistor and has to work at full power for mot which id guess using a relay to switch the drls off once the full beams are in use but this wiring stuff baffles me unless I can see it

Thanks in advance

Dean

Im a stranger here lol I just forget to log in haha

Around 60 for the rear I think and around 100 on the front

Dean

Thanks buddy

Thanks Ian I guess the pin layouts are different?

As the title says guys I have a perfectly working stock unit but there seems to be lots of different serial codes on the front of the units just under/over the display can you just use any unit or do you need the same serial code as yours originally had?

Thanks

Dean

I've done mine and it was fidly but it is possible I just modified my LED bulbs to fit into the bulb holder and sat them at 90degree angles so that they face the front of the buttons or you won't get good spread hope this helps

Trc and snow ARE illuminated when your lights are turned on all your climate lights should be on including both front seats and trc/snow see the pic abut further up that shows exactly what yours should look like minus the LEDs

Guys my trc light/snow both light up same bulbs in them as in the heated seat switches I had some spare r286 led/SMD bulbs laying about so I choped and sanded them down to fit now I have white LED buttons :-)

I wasn't aware there was a meet at blue water... When is it? As for the holder I've managed to get both now but thank you

Dean

Why not just add puddle lights would be far easier to do I'm a novice with wiring but done completely myself

http://youtu.be/IQFj6yC2xwo

A little while ago I stumbled across someone selling a connector box to use the sat nav unit with aftermarket radio....

Can I find it now no...

Had a rummage around but still can't find it anyone got a link or know who it was?

Thanks in advance

Ait racing on eBay do one its £300 iirc

Oh I know lol but it's always worth an ask invade someone wants to put theirs back to standard before selling etc its just a stop gap until I have the money for a tte bumper

Hey guys as title says its for an is200 2001 se price and postage please

Dean

Not sure I'm allowed to post do sorry in advance if I'm not

Bit of a long shot but anyone want a standard is200 grill for an aftermarket sports grill?

Arch liners as the wiring is too short drivers side will come out from the front tho

Nice bit of discretion used there Ian top lad

Bump still need one :-(

Only pic I have atm

I've run mine unfused as LED lights are very small draw I've also added puddle lights into my wing mirrors on the same circuit ill post a pic 2night once it's dark :-)

Ok tameracingdriver thank you any way Steve your up do you have these :-D

I need this type

I'm sure it's beige will get a top view photo tho

Yes mate just the bulb holder it should have 3 wires coming out of it if I remember correctly 2 green 1 white ill grab a snap of it when I get home from work later today left it on the kitchen side whoops

Cheers

Dean