LCpl_Sleeper_

I did think that, I'll wait to see if they're back in stock any time soon then if they do i'll snap one up, else i'll get one made up

I'm looking about for a S/S manifold for the 1G-FE block that's in the IS200 I just got, I know these motors are somewhat.. lacking and ECU tuning is supposedly bad (damages the block??) or damn near impossible on these without a piggyback. The only ones available I can find are the same ones, both from eBay and both in the £1500-2000 range, WTF? They're also both from "Playtime360" who I know are actually ToyoSports (A china made importer making lower grade produce) who I've used before for the Civic when I wanted a decent system for a low budget all of the ones I've found from Japan are to suit the 2JZ or the 3SGTE block which I don't have. I could get a custom one made by my Dad whose an Engineer and welds immaculately but the main issue is the manifold flange, trying to find one that is! Any ideas? Thanks!

Whats up guys, I'm Jack.. I'm a Student Lecturer, I just got back from a tour in Afghan in the TA and decided that it was time to sell the Civic Aerodeck and get back into a RWD car (Had an SR20DET 200SX S13 running 380BHP) after a little bit of looking around I picked up my Manual IS200 for £1100 and have a few plans for it but after a quick scan it appears some of them may be a little bit more work than expected My current plans are to sort out the body work (couple of bumper scratches and a key mark down the drivers side) then get a set of coilovers (Meister R's are what I run on the Aerodeck and I love them, probably run these again), a decent set of wheels then start working with the engine I like a good sleeper so we will see what exactly happens with this one Cool!