amoten84

can you see it here

https://www.dropbox.com/sh/k124aoru7739n75/AADJyRhAuQBprMfzMO62Arzna?dl=0

Hi Guys,

I need a lil help. Tried DIY after reading the posts here and tried to install a Bluetooth kit. I haven't put everything back because its not working. So I have managed to unplug the two connectors from the back of the AMP and use the big connector to plug the SOT -913 Lead from Autoleads for my kit. I believe the small connector didn't had a use so I plugged it back to the amp. There were two big connectors in the SOT Lead so I plugged the male back to the AMP and the female to the original one that came out of the AMP. I still have few plugs that are not connected.

I have taken photos of all the plugs and how it stands.

https://www.dropbox.com/sh/k124aoru7739n75/AADJyRhAuQBprMfzMO62Arzna?dl=0

It's easily done.

Took my sons out...removed the misaligned CD put it all back in the car. Sat with him in the car....first CD in! You can hear its gone in wrong. Take the whole lot back out of the car..back into the kitchen....remove CD and start again!

Like you say though once you have the hang of it you can do it 20 mins. Please use tape protection...if you scratch the side cheeks you will be really annoyed. Some of those edges are very sharp.

I noticed when taking out the heated seat button section, it was scratched quite badly. I'd be more annoyed if it was a newer car. I'm just happy it's working properly.

Hi Stuart,

I am having the exact same problem. Do you still have the document to remove the stereo?