-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Tutorials
Lexus Owners Club
Gold Membership Discounts
Lexus Owners Club Video
News & Articles
Posts posted by Wootty
-
-
Very good thread.
Ive got the dreaded brake judder too.Discs and pads are about 5 months old and started after about 2000 miles.
New set on the horizon me thinks.This time i'll put my d.t.i on the hub face.
-
welcome from another Essex member
-
be careful with manual boost controllers.
vacuum at idle should be around -1 to -.8 so your ok with inlet manifold pressure.
only .3 bar at full boost is deffo wrong.
depending on what ecu map its got??? should be running a safe .7- 1 bar.
can't remember what compression ratio these Toyota lumps are but id imagine 1.3 bar is a MAX.
without seeing it in the flesh I'm just speculating.
Phil.
-
have you checked all intercooler pipework and connectors,if its spooling with no boost.wastegate actuator not set properly.??
I've had sti scoobs and focus rss and all turbo'd lumps are basically set up the same,start at the throttle body and work back thru the turbo,intercooler and back to airbox etc etc.
-
-
welcome to the club
Sill Corrosion
in Lexus IS200 / Lexus IS300 Club
Posted
yep very common design fault.
mines has this done on both sides and my mates blue is200 which is 3 years newer than mine has also had a plate welded in exactly same area.
luckily mines black and doesn't show up that badly.ive waxoyled all the sub frame and upper shock mounts too as they were looking a bit sad.
get it done before our lovely lovely winter approaches, (which is normally about 7 months of ******* weather).