Do Not Sell My Personal Information Jump to content


SHAHZ

Established Member
  • Posts

    3,297
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Posts posted by SHAHZ

  1. i bottled it and ordered 35w hid's will fire them in at weekend.

    is it a headlight out job?

    got them for £47.99 delivered from hids direct found them good to deal with in the past.

    thanks for your input guys

    Nope, no need to remove the headlight, tis very tight on the passenger side, but can be done!

  2. Tools Required:

    Flat head screwdriver

    8mm socket (although can be done with a spanner)

    Time Required

    Approx 20 mins

    The first thing you will need to do is to remove the clips holding the boot lid backing

    Picture001-1.jpg

    You will then see two 8mm bolts on either side of the latch which you need to remove

    Picture003-1.jpg

    There are another 2 bolts behind the little plastic hatch which the latch sits behind that also need to be removed, this is a PIA if you don’t have an 8mm socket, I had lent mine to someone so had to do it with a spanner and is a right pain to get to with!

    Picture007-1.jpg

    The (bar) panel above the number plate is now loose, however you will need to give it a bit of a pull as it is still attached with 2 clips

    Picture008-1.jpg

    Panel removed

    Picture009.jpg

    You then remove the clear lens by pushing them to the side and lifting out, I think mine went outwards i.e.the right one I pushed towards the right from its left side and the left one I pushed towards the left from its right side

    Picture011-1.jpg

    The bulb holder then just twists out of the lens and the bulb can be swapped

    Picture012.jpg

    Do everything in reverse to put it all back together

    Picture013-1.jpg

    Job done :)

    Picture014-1.jpg

    Hope that helps!!

  3. Ive had T1Rs on mine for years and cant fault them, currently got conti sportcontact 3 on them and i have to say there is quite a difference in noise, im finding them so much quiter.....they stop really well too.... ive heard a lot of good things about the FK452's and thats probably what im going to try next!

  4. I got the screens brand new from eBay, keep an eye out as they are always around! B) As for the install i cant really say what is involved for the RX as mine are in the IS. I installed an aftermarket headunit and run the screen from that. THISwill give you an idea of whats involved in changing the head unit (for the IS), each screens will require a permenant & switched live, ground and RCA lead feed from the HU.

  5. Hi, i have problems with slight pull and snatching over bumps/dips in the road, I did a search for wheels in motion ended up on a site called blackboots, has anyone heard of them? They are offering the same type of thing the closest one to me is a garage at christchurch called the christchurch tyre company, or should i just try the Lexus dealer in poole?

    Blackboots is part of WIM B)

×
×
  • Create New...