Roychip

Yeah, done that now. What a difference. 

Page 478 !!! The user guide that came with the car only has 185 pages ?? 

Thanks Colin Barber

I was using the manual supplied with the vehicle, in which I could not find any reference to adjusting the height of the boot.   Lexus dealer told me it must be a dodgy sensor and would take it in to look at it, surely they must know  about this height adjustment !

I have downloaded the "full" manual from lexus, so much more info. Many Thanks.

Roy 

I must have a different manual to you then in mine page 118 is part of the " maintenance and care" section and is mentioning Light bulbs, LEDs and condensation build up ???  😁 

Manual pt no: PZ471-U0047-EN      V0

Anyone got a different version

Thanks all for your help.

With what you suggested and a question placed on internet I found the link below.

https://www.torquenews.com/1083/how-easily-adjust-opening-height-rear-hatch-lexus-rx-crossover

I obviously didnt wait for a long enough beep !! it actually gave 3 beeps.

Thanks, problem solved. Thank goodness for forums like this

Thanks for your replies, I cant find any reference to boot opening height on the dash display, anybody know where to find it ? Neo_gsf thanks for your suggestion, I tried it but it did push up to correct height but when I re tried it was still only halfway (approx) up.

thanks for your help

On my NX300 Today I went to open the boot and its only going half way up !! I rang local Lexus dealer who said it must be a sensor problem, but I wonder if anybody has had the same problem. Most grateful for any suggestions.  

I should have added that you can change the car voice volume by using settings but I was hoping there was a way to adjust this volume whilst driving. 

Hi all

I have car play in my NX 300 and I use the "maps"  navigation when needed, only problem is the guidance voice seems to have only 1 level of volume !! Has anybody found out how to reduce the voice guidance level when using car play navigation apps ? I have tried the obvious, turning volume down on car audio, no difference, also on my Iphone there is a setting on maps guidance with 4 levels of volume .....high, normal, low, and off. neither of which make any difference to the actual car volume.

If anybody knows the answer I would grateful

Many thanks

Roy  

sixties

treasure

Thank you Ken 

I'll be able to sleep tonight now.  I couldn't find any info about that in the handbook.

Hi all

First, Happy New Year.
I was thinking about my previous Lexus (CT200) when I had a completely flat Battery and needed to open the bonnet, but to gain access to the car to use the bonnet catch I had to use the mechanical key, the lock barrel on the ct 200 is in plain sight on the door handle. I was wondering, if this happened on my NX300, where do you insert the mechanical key ? In the manual I found out how to remove the mechanical key from the key fob, but where do you insert this key ( I'm leaving myself open for suggestions here !!)  I have looked through the manual (if its there I can't find it)  It is really only a thought as I had not much to do New years day. But if anybody knows, please tell me.

Thanks for reading

Thanks

I have, unfortunately, purchased a Cplay2air so I wont be able to use it, at least I will, if I understand the replies, be able to use my Samsung on the head unit upgrade using the android part of the upgrade. If I assume wrong please let me know.

Thanks for your help 

Thanks for that info.subria88

Hi all

Next week my NX300h is going in to have the apple car play software installed. I have a Samsung S7 edge phone which works perfectly at the moment but as the Samsung is an android operating  system does anybody know if it will work via the "carplay2 air" wireless connector I have just purchased or will they only work with apple iphones ? the info. I have found so far on this is a bit  inconclusive.

Any help would be appreciated.

many thanks 

Just for info.

I think I have found a solution to my original problem (phone would not connect automatically when I got into the car, I would need to turn blue tooth off  and then on again before it would connect) I originally connected my phone via the car, asking the car to find my phone, the problem was always there, I later tried connecting the car to the phone, using the phone to find my car. Now all ok, phone is always there when I get in and start the car. The phone is a Samsung galaxy S7 edge in case anyone else has this problem.

Hi

I want to connect my dashcam to the ECU supply, I have tried using a piggyback fuse connector and it works OK BUT I don't think the piggyback connector is secure enough in the fuse box, especially as there is a damn great thick  cable attached to the piggyback  connector, which must put a strain on it, call me cautious but I think I would worry about it working loose whilst driving.

My question is does anybody know whereabouts  and the colour of the cable from the ECU fuse so I can make a secure connection from that wire, obviously with a separate in line fuse for the  dash cam. Hope I have explained my question ok.

Thanks

Roy

Thanks Olliesgrandad I'll check in the morning.

Other than the problem with the phone connection and voice command when trying to speak a destination address I think the car is wonderful. 

thanks for your reply 

Roychip  (Roy)

Thanks DanD   

I'll give that a try in the morning. Thanks for your help.

Roy

I have only had my NX300 for 2 days I changed from a CT200. with the ct200 I would connect my Samsung S7 phone to the car and it would be there, connected, every time I used the car.

With this NX300 I need to turn off the Bluetooth on my phone and then back on again to get the phone to connect, once this is done it stays connected until I turn the car off and have the same problem next time I start it. Anyone had this and found out why better still found the solution.

Thanks in anticipation.

Sorry its the second problem I've asked for help with in two days !!

Thanks for your responses, I still try to get it to recognise an address in the voice   format it asks for but so far it hasn't recognised any of my attempts so I'll just revert to typing the address in.

Thanks Herbie

At least its not me  then !!

Hello all

I have just taken delivery of a two year old Lexus NX300h and its great.... but I cant seem to get it to recognise an address entered in voice control.

I have tried all sorts of speeds when talking, even changed my accent but still it keeps telling me its not recognised it, It tells me to say the house number the road and the town.

Done all that and it still rejects it.

Is it my voice ? has anybody got or had this problem, Id love to know what I'm doing wrong, if anything.

Thanks in anticipation

Roychip (Roy)