Serran

correct offset is 45mm

by adding spacers the offset is reduced

so a 35mm offset with a 5mm spacer will make a 30mm offset

wouldnt recommend any less than a 40mm offset,

will depend if it will be lowered as well

centre bore is 60.1mm

what wheels are you looking at ? 

i might have a set that might interest you 

←

i disagree.. im currently using a +30 offset on all corners for my track rims. you will need to roll the guards pretty much all around the wheel well. they are even more perfect fit than a +40 offset. of course this depends on your camber settings. but i dont use anything overly too agressive. i do have a fairly suspension/sway bar setup too.

having said that, i do use a +40 offset for 7.5 front and 8.5 rear.. and that offset is perfect setup for steet.

pics of a +30 offset

side view:

front view:

the problem is we cant find the problem...

were still looking for a fix to this problem...

anyone knows how to fix this?

←

check the voltage settings for the sparkies...

for those with a boost gauge.. do you find that boost is at .3bar and only goes to .4 bar in the last 2 hundred revs (6000-6200).. or if you have the pulley upgrade, boot is at .4bar and hits .5bar at the same rev range..

(done during flat foot)

i use delphi 12 slot htsl fronts and 6 slots rear.. £500

with delphi rc front and zr rear pads... £300

maybe a little pricey.. but i use mine on circuit regularly..

Hi

HKS FCON v-pro allows this............

There are rumours that the factory ECU can be tweaked but I don't know anyone who has done this....

←

yes you do..............me

←

instructions pls on tweaking the ecu..

ps. im using emanage right now and can't justify getting vpro at the moment..

besides using a full race computer which allows to remove the rev limit.. what aftermarket options are people using?

I'm not concerned about engine internals and the like, as this is sorted.

thanks

forgive my lack of terminology... but has anyone played around with the gears in the tte compressor?

something on the lines of like when you change final gearing for your drivetrain, but instead, doing this with the compressor.

i'm not interested in uprating the pulley either, i have done that.

So which pulleys do we speak of?

Can somebody mark them in this picture?

LINK

lol thats the pic I took of my engine pre-hoisted

car is undergoing a full respray..

heya dave.. any update for pricings on these?

mark can you pm me total costs incl. shipping to syd, au.

thanks

nah i was commenting on dave's mention on the pulleys for those with s/c kits.. from what you're saying it won't include the tensioner.

so the only difference between the s/c pulley kit and this kit should be the uprated pulley and the tensioner?

hey dave.. id be interested in the bolts (red), bar, and hose

Hi All,

I have checked the is200 spec sheet.. it mentions the wheel base as 2670mm.

Is this the same as the wheel track measurement?

Wheel track measurement is the length from the middle of the left wheel to the middle of the right wheel.

I think the wheel base measurement could be the length from the outer wheel to the other outer wheel. (not the middle).

I just need this info as i am getting my car engineered for street compliance on the road with my proposed rim setup in oz.

thanks

cheers colin... thanks!

alot of members here have mentioned they have installed this.. surely someone must know

hi all,

anyone know the part number for the jun flywheel for the is200?

thanks

hey mark,

can you give a costing for these for shipping to sydney via ems for quantity of 1 and quantity of 3. also, can what's the weight of the flywheel, and material composite?

also, anyone have the tdi flywheel fitted?? any comments would be appreciated

thanks

engine : gtx

brake : super dot4!

compressor : up for discussion here

Hi All,

What do you guys use for the supercharger oil? Is it toyota sc lubricant? these are quiet expensive.. so was wondering if you can use alternatives like hypoid gear or 90 weight synthetic gear oil ?

and what would be the recommended gear oil change (how many kms)?

thanks!

can anyone confirm that the trd or toms flywheel for altezza will fit the is200?

thanks

hi guys..

does anyone have the figures for 4.77 final gear? also wondering if 1:1 is still on 5th gear on a manual

thanks

hey guys.. has anyone dyed their carpet mats?

i know there are carpet dyes on the market.. just wanting to know if anyone has used any and can make a review about the product they used.. or any pointers that may help.

thanks

Hi All,

I am thinking of getting 19x8 (front) and 19x8.5 (rear) both with 40 offset on 235 profiles.

Anyone currently using this setup? Or has used this previously?

I currently use 19x8 (front and rear) but with 35 offsets and 235 profile.. and all corners have been rolled/lipped.

thanks

hey dave..

will the end design take into consideration of an s/c install?

cheers