Do Not Sell My Personal Information Jump to content


Dezi

Members
  • Posts

    23
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Posts posted by Dezi

  1. RUST!

    I missed my opportunity to take a before picture. But the rust on my sunroof was really bad, luckily it never transferred to the metal on the car, just isolated on the glass itself.

     

    Easy to do, but I highly recommend it if you have some rust.

     

    Tilt your sunroof and switch the car off.

     

    Peel off the rubber wind-shielding things on your sunroof, looks like an accordion. 

    20230923_180638.thumb.jpg.bb73a1330484fdf370ba4c210be0f181.jpg

    The Torx25 bit with the washer is holding the sunroof there, there are 2 on each side, one on the front and one on the back.

    20230923_182542.thumb.jpg.25c0699359b10649afae9d520c159272.jpg

     

    Front view with screw out

    20230923_182052.thumb.jpg.77d1479bd1525842496213516922a1ca.jpg

     

    Rear with screw out

    20230923_182049.thumb.jpg.8a34f3322978140e1e180d4263ca4be6.jpg

     

    Then lift up from the inside and get someone else to lift out the way

    20230923_180534.jpg.415da49f57f00e73600d0601b55e438f.jpg

    20230923_180649.thumb.jpg.9806ff09e57914920902e4a3e2188e6f.jpg

     

    Scraped the majority of the rust off the metal and taped up the rubber seal oh and make sure to cover your glass you don't want over spray onto your glass!

    20230923_180658.thumb.jpg.38355b8c0ab0e0efa20050ef7f72ebdd.jpg

    Here's a close-up of the rust after the spray

    20230923_180702.thumb.jpg.f9963a18d086687fe3cf39e9566075f2.jpg

     

    Then you're done, you may need to lift the sunroof from the inside before fully tightening the bolts in just so the sunroof sits flush with the roof. Otherwise, I noticed that it does sink in if not lifted potentially causing some wind noise.

    As you can tell, I started this sunroof job quite late into the day, and by the time I needed to wash the car it was already dark. 

    image.thumb.jpeg.c65ffa8136ca3b81be87cf5454dc7ae8.jpeg

     

    • Like 1
  2. Forgot to post this, managed 27.5mpg, would have been better if traffic was better.

    307miles with 1/4 tank to go until empty, I'd say that's pretty good.

    image.thumb.jpeg.9fff9f5cdf65674fe5e16af17057135f.jpeg

     

    Bonus pic after a tactical refill in Cornwall to get me all the way home:

    b55826d8-a1b7-45f7-a1a0-8f998da7d699.thumb.jpeg.f588e0d0fbf7e044f0846309c1d03181.jpeg

    • Like 1
  3. Drove down from London to Cornwall for the weekend, and the car was perfect.

    AC all the way 250mi+ and still need to drive back but it was so comfortable, it's my first car with air suspension and I'm not sure I can go back to coils.

    I'll find out MPG tomorrow morning and post an update.

    20230916_104544.thumb.jpg.2068e62e6c7dac2feb4f794c3dd6a9a7.jpg

    • Like 1
  4. On 9/15/2023 at 7:32 AM, Malc1 said:

    Dezi …… back to your aircon …… what was the final bill ££££ to sort that all out ? 

    Malc 

    Ah yes!

    £500 for Condenser, Rear pipes converted to rubber, labor for fitting Condenser, Compressor, and Rubber hoses.

    £430 for my aircon compressor from AutoDoc.

    • Like 1
  5. 2 minutes ago, Redefined said:

    I've already taken your tip for the rwar number plate. I too have a touch of rust there and always wondered how I'd get it done.

    With the aftermarket stereo though, just be aware that they do go bad after so long, so obviously look after your original for if that time comes.

    Wheels... I really want a wheel upgrade. But don't like to advertise the fact that I find the standard LS430 wheels rather dull and boring. Had my lenses refurbed a few weeks ago and they look mint - but I need to get some 3m clearcote on em.

    Regards the HD lights @Dezi that's a rather cool thing as I really miss mine from the Subaru. Looking forward to seeing how you get on with yours (and how easy are they to fit). I think mine is misnamed (V8, Suits You Sir) and in the wrong section. I never thought for a second that we have a dedicated 'Lexus Builds' area on this forum... 😆

    Ah awesome! I wanted to get rid of that license plate rust ASAP before it spreads to the rest of the boot.

    Yeah was thinking about that, so I've kept it stored away until that happens.

    Wheels, I'm actually torn with wheels, I want to find some 19s or 20s but don't know what to get. Originally I was going to get WORK VSXX from Driftworks which I may still do just haven't gotten to that point yet of my build.

    I'll LED them all eventually! haha

    I'll see if I can find your thread 🙂 

    • Like 1
  6. 21 minutes ago, Redefined said:

    Nice one for sharing Dezi. I'll be keeping an eye on this development. I'm also charting my progress with the (older) LS430. Yours looks absolutely lovely. Flint Mica, lovely (name and) colour.

    Thank you! it's got some ways to go, lots of stone chips and dents 😆.

     

    I'll keep a look out for your thread 🙂 

  7. 10 minutes ago, steve2006 said:

    I have the Toyota Celsior the same year as yours, an interesting difference regarding the front fog lights is that with UK models the side sections have no bulbs fitted but on the Japanese version they do.

    They are called “cornering lights” and illuminate on the same side when the indicator is on only when the sidelight/ main headlights are also on ( so basically when dark).

    They then illuminate the kerb as you turn.

    IMG_0139.jpeg

    Oooo! That's kinda cool actually damn the Japanese get everything!

    Ventilated rear seats are something we're missing too.

    • Like 1
  8. Headunit from AliExpress

    The best way to explain how to remove the original unit.

    20230913_180743.thumb.jpg.ae2133c468c370cf00c90dcb896b93ce.jpg

    Now this is a headache, all of the wires are mainly unplugged. I believe this is dependent on what model you buy as to what cables are required to be plugged in. I cable-tied the majority of the wires into a bunch so that they could fit in the red square in the above photo.

    20230913_180752.thumb.jpg.3ac70e0d44e54ae9519fdc13c6a04082.jpg

    On my unit there's a specific trigger wire which is pink (link at the bottom of what unit I purchased) I added a little wire splicer so that I can connect my RCA with trigger to that and feed the wire under the steering wheel, along the top of the window trim through into the boot.

    20230913_180806.thumb.jpg.b48a99690d581f6f1b4a1f2ade028409.jpg

    Here's the trigger wire with a spade crimped on

    20230913_180822.thumb.jpg.16401b2f5c151117d77d54993531e074.jpg

     

    The head unit I bought:

    KK5 8G 128G: https://www.aliexpress.com/item/1005002744790134.html 

     

    • Like 1
  9. After the car was sitting at AirCon Direct for a week, it got really dusty and now needs a wash.

    image.jpeg.07daad8a352fc61250724124305dd5e7.jpeg

    But I have retained my fridge! my compressor was busted, which also killed the condenser and my rear lines were also corroded.

    Now after basically an entire new aircon system, it's blowing ice cold on all of the vents + the fridge.

  10. On 9/11/2023 at 9:46 PM, steve2006 said:

    Always a couple of lemon Fantas in mine 😀

    I thought the reversing cameras were standard fitment as part of the Park Assist system, my screen automatically switches to rear view when reverse is selected along with the dipping mirrors.

     

     

    Oooo Lemon Fantas!

    I found the issue with my reversing camera not working on my aftermarket head unit now, I had a bad connection to the ground of the reverse light! Now it's all working!

  11. On 9/7/2023 at 4:52 PM, Malc1 said:

    that's brilliant then.  I've only ever read of the rear pipes just being capped and losing the fridge !

    Malc

    I'll update once I find out if the compressor is good and have a fridge once again.

     

    He did mention that it's often they get capped instead as that's the cheaper option, but I didn't want to lose the fridge. Even though it's more of a cool box.

  12. Dropped the car off at Aircon Direct in Ebbsfleet unfortunately the compressor is gone and the rear pipes are corroded.

     

    Mark at Aircon Direct was super helpful and if you need the rear lines sorted he has replaced mine with rubber so I can retain my fridge!

    4d35eaed-6746-4daa-8180-b72d904a3115.thumb.jpg.a98555a4f6c5a8b9c1cba3ae46a76492.jpg 

    It's still sitting there at the moment while a new Denso Compressor is on its way to his shop to be dropped in and regassed.

  13. Bought an AliExpress head unit and have been routing a reversing camera cable from head unit to the boot.

    I think none of the clips for anything in the head unit had been touched.

    This was a paint to remove

    21b2a169-6950-456d-a3fa-c2a7e538a105.thumb.jpg.327358e7e92790d73b864d04c02df186.jpg

    More pics to come as the reversing camera took longer to wire up than expected and ran out of time.

    Now the car is away getting A/C done.

    • Like 1
  14. 1 hour ago, steve2006 said:

    My personal opinion is I prefer the original wood shift knob, however the replacement would suit some carbon fibre wrap on the wood trim and modernise the look of the car.

    Good shout Steve, I'll put that on the list!

    I quite like the look of the LS460's centre console in grey too.

  15. 20th August 2023

    Took out the license plate light and reversing camera piece to fix some rust (common spot), 4x clips, and 4x 10mm bolts.

    Some sanding, Acid etch primer and some gloss black (you can't see this after the trim has been attached)

    B23EF439-5D1D-4DE2-9C81-BF4DC3D1533C.thumb.jpg.1ebb5087588258cbae8b00a11d69562e.jpg

    B074B80D-4E2F-4491-B653-74BB2CA7FD79.thumb.jpg.7f21b91279d1f82468f3cf6f4331e9c7.jpg

    Looks untouched.

    E6123E07-6BD2-4F3D-B016-3FA73C47A853.thumb.jpg.2063537be5e21df97166f33e0f98ea2f.jpg

     

    • Like 1
  16. I guess I'll start logging this build. Unsure on the full plans of this car at the moment!

     

    Collection day 19th August 2023, had to obviously collect the LS with another LS

    IMG_1115.thumb.jpg.82310e98dfd32e76b6ff3fb8fb6b8001.jpg

    This is it, the wheels were refurbed to gun metal which suits the Flint Mica

    IMG_1112(1).thumb.jpg.60f47740b1e7eb140874c4beb472aff7.jpg

     

    97,835mi surprised this car was still under 100k, many many miles for this car to go.

    5F912431-5183-4077-849D-9F2F8D198423.thumb.jpg.cd7162f769252719d8cd140a726790d7.jpg

     

     

     

    • Like 2
  17. 11 hours ago, BigBoomer said:

    It might well be that you are unlucky with both cameras. You need a known good camera to test with, and that can be difficult to find.
    Either that or else a known working LS430 that you can test your cameras with.

    There is a camera on eBay at the moment that should work.
    https://www.ebay.co.uk/itm/254025868235
    If that doesn't work, you can send it back for a refund.

    Ah thanks, I've bought the last one!

    Hopefully, that's it, I think I'm going to order an AliExpress head unit and a separate camera in case this doesn't fix my problem.

×
×
  • Create New...