Sign in to follow this  

Resetting IS200/ IS300 engine ECU


Description

Resetting IS200/ IS300 engine ECU

It is recommended that the engine ECU is reset after any engine performance modifications have been made to the vehicle, including using a higher octane fuel, to accelerate the learning of any new parameters. Resetting the ECU will also clear any stored error codes, however if you have a fault with your vehicle it is advisable that these codes are retrieved rather than wiped as they may help in diagnosing the problem.

  1. Make sure the ignition is turned off
  1. Remove the engine bay fuse box cover
  1. Remove the 20Amp/25Amp EFI fuse
  1. Remove the 15Amp ETCS fuse
  1. Wait 30 seconds
  1. Re-insert the two fuses
  1. Install the fuse box cover

It is also possible to reset the engine ECU by removing the battery. Please note that this method will also reset any memory settings such as radio presets, trip mileage, clock etc.

  • Like 1


Recommended Comments

There are no comments to display.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a Comment

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.