TERMINATOR

I HAVE BEEN OFFERED A GS 300 SE 2002 WITH 40K AND A GS 430SE SPORT 01Y WITH 65K.

THESE VEHICLES ARE BEING SOLD FOR THE SAME MONEY,WHAT IS THE BEST CAR/VALUE?. HELP WITH THE RUNNING COSTS COMPARISON.

WHAT WOULD BE EASIER TO SELL AFTER A COUPLE OF YEARS.

ANY ADVICE GREATFULLY APPRECIATED.

ALL GONE. THANKS ANYWAY.

YHPM. I WAS SELLING THE SPOILER FOR £60 £100 FOR RIMS OR £150 FOR RIMS N SPOILER.

WHAT A BARGAIN.

I have a brand new tte from lexus.cost me £130 this is still boxed.

selling very cheaply YHPM. If interested.

Also 4 17"se rims £100.

Thanks. I thought they were worth about £100-£150 as they are.

I have a set of is200se 17" rims.4 new tyres 3 corroded alloys and one out the box. I want to put them on eBay but i am not sure what they r worth.Can anyone guide me?

Thinking logically about your reply ryo. If i get 200mls from a full tank then it would be 100mls from 1/2 a tank.If you get 170 mls from a 1/2 tank then you get 70mls more from 1/2 a tank and therefore 140 miles more than me on a full tank.So who is driving with the brakes on ??

I get 200 miles from a tank driving locally.

B)-->

CHEERS

I'm looking for two headrests for the front seats.

Where would i get hold of a set? They would need to be black cloth and how much money would they be?.

Rides lovely on 20s. If i had the cash i would have went with 22s,but i'll have to live with the 20's.

Mods to come r tints,lowering,chrome grill,induction kit and poss new back boxes. money dependent.

If i suddenly become flush then an imported kit. :D

started modding.tons more to doMy Webpage

Depending on the locker.If the pins are on the outside the easiest way is to use a socket set. put a socket over the nut,keep going down the size until you have a perfect but tight fit,if its a 15mm use a size smaller and hammer it over the locker. Use the socket ratchet and hey presto. Set of wheels of a car in 5-10 mins max. Any other locker pm me.

I have a slight rattling coming from under the front end.It happens when i accelerate and when the gear change to 2nd comes,it's gone. I only hear it with the window down. Any ideas?.

If you go to a motoparts store or some Halfords,there is a small pack called BEAM BENDERS these should be suitable and the instructions are very easy on the rear or the pack. I think the manufacturer is RING.

They may have a web address.

I will start again.How do you download pictures.SORRY if i offended anyone but the site is quite hard to navigate.I was frustrated yesterday at the time involved in trying to download a simple picture.

No matter,after looking at the replies,i appologise for my outburst.

The opinions of wheels-motion "the company" have been taken into consideration and i will forward the comments to all the other forums i am in throught the uk and the us.

Thanks for your understanding in this matter.

POST REMOVED. BUT IF ANYONE HAS ANYTHING CONSTRUCTIVE TO SEND I'LL HEAR IT.

=:

I have just put on my 20s. 9" wide and 45 offset,TIGHT.

Pictures will follow soon.

ADR rims are one of the biggest producers in the us and make top quality wheels,the problem with chrome is salt in the uk. I bought a set of triple plated rims from the states and had to remove them before the winter.What is the point in spending £££££££££ on rims and not showing them.

yhpm.

Post Removed.

........... !

Cheers,i'll just stick them in the garage n put them back on when the car goes. ;)