eightysix

i think the se. definatly not a sport. how can i know because i dont see it on the papers. its from 2000, has a gps, heated seats, automatic gear,armrest etc... so i think se

anyone?

Hi, is there anyone that knows if there are any replacement front speakers avaible for the lexus is200, without having to change the amp and all other speakers (i've read something about different ohms?). The standard speakers in the back are really good but the front have a lack of bass for me. Thats why i only want to replace those and keep the original setup. thanks

Is there no way to make the mod that the turnlights are always on (the same strenght as using them), but when you use them they do go completely on and off? (so not low strength and high strength) I rather would have it that way :) It looks like no one receives pm's from me

looks ok but i want them always on in orange, and these shine white :( Just follow the same instructions as the link, but use a dual filament 7443 amber bulb. Hi, i've looked at the instructions, but do i have to find the dual filament 7443 holders from a junk yard? because i think this is almost impossible to find here as almost no one drives lexus. ps, have you received my pm about the foglights to sidelights?

looks ok but i want them always on in orange, and these shine white :(

Hi, I want the us look on my turnlights, so that the turnlights are always on, but when you use them they go on and off. I tried to do it today with something a mate gave me, it was something i had to put between the turnlight cable, and connect with the standlight cable, then it should give the turnlight always a 6V power, and when you use it it goes from 6volt to 12 volts. Only problem was when i installed it, the turnlight didnt work anymore, and the side turnlight was always on at 6v and worked when you used it (went from 6volt to 12volts brightness) i disconnected it and now everything is back as normal. Can anyone help me out is there a way to do this? here is an example of what i mean:

i don't know there's fluid in it ..

hi, i ordered the meccatune 6500k kit too today. it's the 9006 fitting right? Can you post a picture of your engine bay so i see where you mounted the ballasts? What sidelights are you going to buy?

yes in german...

please.........i'm a total leek at electronics

i want to replace the turn signal lights left side is no problem, i just unscrew it. but the right side, i can barely get my fingers between it because of the location of the wiper fluid, are they a little bit dumb at lexus..

As i wrote above i ordered the dual filalment bulb holders. Can anyone provide me a step by step tutorial for this? thanks in advance

.......Obviously not enough!! :duh: ......there are loads of threads on this topic.....this should be what your after LINK.....although from what i can remember other members have found other ways of doing it...im sure rob wrote this up, and he was the first to do it, so stick with it and you cant go wrong!!.....also gave me useful tips when i was doing mine :) but isn't that the tutorial for only having them as brakelights?

hmm i don't understand anything of that german tutorial. Do they use the dual filament holders or do they make them theirselves? :s no one has an english tutorial?

it was +-59 euro for both, thats around 36 pounds i think do you know how to do the full mod?

first of all, yes I did a search on the forum :) the thing is, i only found diy's to do the foglights to brakelights mod. I want to do the full mod so they run together with the backlights, and work as brakelights - foglights too. And i didn't found any tutorial of this. Only that i had to order 2 x 81555-53010, dual filament holder. I did this today at the lexus dealership. But he didn't know what lights i needed to order for it. Can anyone help me how to install them and what part nr the lights are? thanks!!

nope, the standlights and the blinkers wanna get the us look that the blinkers light up as standlights too

thanks mate

Hi, to every light goes a white and a green cable. which cable is the + and which is the mass?

you can get one through www.meccatune.nl same thing and only 250 euro

do you mean where the air filter is? What is the kick panel? thank you where the fuses are kept... [ hmm here is a pic i jus took, sorry for the cellphone quality. This should be the amp? what covers do i have to remove then?

do you mean where the air filter is? What is the kick panel? thank you

does your car have an amp, the amp is located behind the glovbox to the left.check the wires going into the amp if you have one alternatively have you checked the wires on the speaker itself, the actual wires dont go directly to the amp either, they go into the left footwell fuse box Hi Monster Mat I found the amp but i have no idea how to reach the back of it to check the wires. i can barely get my fingers through.. you will need to remove the glove box, there are x2 push pins at the bottom where it hinges from yes that is what i did, and i can't get to the back of the amp (the black rectangular thing with silver, standing vertical)

does your car have an amp, the amp is located behind the glovbox to the left.check the wires going into the amp if you have one alternatively have you checked the wires on the speaker itself, the actual wires dont go directly to the amp either, they go into the left footwell fuse box Hi Monster Mat I found the amp but i have no idea how to reach the back of it to check the wires. i can barely get my fingers through..