Rob_200Sport

Oh no....dont tell me that. I'll be paranoid that will happen to me too! Doesn't sound good for you though. You got a mission ahead of you to take the dash out! Thats exactly what i wanted to avoid! Ive only ever had the clocks & AC Unit/stero out of mine. So i cant help you im afraid. Good luck, let us know how you get on!

Just wanted to post back an update. I flushed matrix in both directions. Used a whole bottle of Rad flush and left it to soak in matrix for about half an hour. While that soaked, flushed rest of cooling system. Connected back up, topped up with antifreeze and water. Heaters working again! So chuffed, this has saved me freezing all winter and possibly hundreds of pounds to get a garage to look into the issue! Very happy Lexus owner :D

Thanks lexynik. Hadn't thought about adding radflush for a day or two before. Good idea. I'm not going to get chance until the weekend now anyway. So off to halfords this avo! Cheers for the antifreeze reminder ;) (Would have added it anyway) Top advice!! Cheers

Hi guys, Nice thread, I'm hoping reverse flushing will help to resolve my heating issue. My heaters dont work at all, either side. They blow fine and I've checked that all vents blow correctly. Have checked the rad and that was a little low, so i topped it while on a hill and no air bubbles. Just wanted to check i found the correct two hoses i need to remove to flush the heater matrix. Are they the right ones? If so do I need to take them off where the arrow points? Do i flush the side that is in the engine bay, or the other side - inside the car? Any help appreciated. Cheers

Sorry for the confusion, it was a wedge type led, with a bulb type glass covering. Have given it a good yank and managed to pull it out now. Thanks for the help though!! Just doing the climate control LED's now. Cant wait to get 'em all sorted :D

Hey guys, I am in process of changing the dash LED's. Have done the dials no probs what so ever. Look sweet!! :) Now trying to change the ignition LED. Believe I have the correct LED, although it may need sanding to fit. But i can't get the old one out Have taken the wire/cable out of the car and tried to pull the LED with a pair of long nosed pliers. But guess I clamped it too hard and the bulb shattered everywhere. I just cannot see how you take the bulb out of the holder. There are the 2 wires in the back of the holder, but they dont seem to want to pull out & I can't seem to push them through either. Can anybody offer some advice. Here is a couple of pics Cable and new LED Pic of holder and 1 shattered LED :(

Hiya guys, New to the forum myself and wondered if you got a resolve on this. I'm looking to replace my head unit and have a 2001 sport. Not had a look to see which connector i have but i presume it has an amp. Can only have it half way before it disorts anyway!! Is the PC2-92-4 part number the correct amp bypass?? Cheers!