R32crew

Hi ok thanks for the info Appreciated

It was due to the oil pump packing up 😞

Hi Guys… Now that I need an engine for my Ct200 Am I correct in thinking that there are 2 engines types a 136BHP & a 98BHP. If so how do I know what the BHP would be on the engine I’m going to buy … ? Thanks

Hi thanks for the info… I did service it regularly but at my friends garage or I did it my self… I did clean the EGR Inlet manifold & the Throttle body last year. They were a bit dirty now but not too bad. My car had 170k miles on the clock I use it to travel to work daily about 100 miles per day. It’s not the headgaskit because the oil & water are fine they not mixing etc. I think the oil pump packed up on it & it stopped supplying oil to the engine. Its going to get striped out in next day or two so I should have a better idea what the cause was.

I don’t know anything about the Relax warranty? what’s is the Relax warranty?

Not good news 😞 Had a compression test done on the CT200 today… Piston 1 : 200 psi Piston 2 : 180 psi Piston 3 : 170 psi Piston 4 : 80 Psi so the engine is nackered

Nah mate Never had the oil changed I did consider it at one point but a few people said leave it so I left it . Iv got some guy coming out today to look at it today let’s see what he says

Hi guys… A week or two back I posted a post on here regarding my Ct200 breaking down & it’s making a loud banging & knocking sound… After a few people looked at it the issue seems to be the gearbox. when in P, D, R, & B the knocking & banging is really bad but when in N the knocking sound goes away… Not completely gone but it’s 90% better. Any one know this issue or had this issue with their Lexus.., Cheers .

Thanks mate Yes getting it recovered to a garage today let’s see what the garage says

Hi guys… My CT200 is making a loud horrible knocking sound… I did realise the same sound a few times before but it came & went & only ever did it for a second or two. But today whist driving the car lost power engine light came on with code P0012 & P3190. The car does start but it’s a scary noise. 1st question is can it be the EGR valve any one ever experienced this ? And is it worth cleaning out the valve ??? Thanks

Hi guys.. Yesterday on a motorway journey all of a sudden my oil light came on (red) Luckily the next service was right there. I pulled up & checked the oil it was slightly under half. Anyway I topped it back up to the full mark. The oil light went off so I carried on a few miles down it was back on again. So I got off the Motorway & it went off again. I drove on local roads for about 15/20 miles it was fine but as I got back on the motorway it was back on again. It started flashing then stayed on This time the EM light also came on. So I pulled up & I have an OBD fault reader tool in my car. It came up with a fault code P0012 A Camshaft Position Timing Over Retarded Bank 1. Any one have any idea what this is & why this happened Cheers

Sorry your correct I’m in my car now they are Auto wipers… sorry.. Yes mine Also go slow & fast depending on the car speed but now they only work on the fastest setting.. Auto & slow speed not working at all

Hi guys.., I have an issues with my 2014 Ct200h’s front wipers.. It’s been about 2/3 days I realised my front wipers on interim & speed one work very very slow. They work fine on the fastest speed. Yesterday they stopped working on Interim & speed 1 but they worked fine on the fastest speed. What could be the issue… Any one experienced this problem.. Thank you…

Ok thanks mate 🙏

Hi guys… On opening the R/O door on the ct200h there a small vent / grill panel I was told it’s a fan to cool down the battery… Never knew it was there does that need cleaning & if so any videos?? Also how often should the transmission oil be changed?? Thank you 👍

Ok cool thanks guys 👍

Yes mate mine did that before the first clean out At first I thought it was engine knock thank god it wasn’t Get your inlet manifold plus the EGR cleaned should solve the issue

I saw a Ct200h yesterday it drove past me white with black wheels & I’m 90% certain it had a pan roof open… It deffo wasn’t a sun roof My A3 Black Edition got a pan roof so I know how they look & open etc.. Thats why I thought if anyone on here owns or seen a Ct200h with a pan roof

Hi guys… I wanted to know does any of the Ct200h comes with a Pan roof ? I know some come with a sun roof but was unsure if any come with a Pan roof ??

Ok thanks mate will give it a try cheers

And the noise isn’t there on cold start It will only make the noise between 1500 & 2000 RPM’s Before & past them RPM’s no noise at all

Hi mate. Milage is 140k but it’s regularly serviced & well looked after. The sound is just there whilst it’s on petrol mode hot & cold. And it’s deffo not the head gasket there’s no mixing of oil & water plus like I mentioned 14/15 months ago when I cleaned the inlet it was fine. Its 100% the same inlet noise

Hi guys… About 14/15 months ago my CT200h was making a knocking / juddering noice whilst driving on low RPM’s. After investigation it was coming from the inlet manifold. I was told a good clean will solve the issue. So I took off the manifold it was full of water dirt oil etc. After a good clean it’s been fine for the last 15 odd months but now the same noise is back. Should I get it off & clean it again or should I replace it this time. Has anyone come across the same issue & had theirs cleaned twice ? Cheers.

Cheers mate I’ll get it checked & get back on here. Thanks

Thanks mate. I’ll run it back to the garage & ask what you have asked. There is no lights on the dash the 3 that do come on go off a minute later. can a diagnostic be done with no lights on ?