Sethman919

Yep. I have a hacked out harness coming so I'll be able to power it up on the bench. I'm hoping with it self powered I can turn off the vcc on my programmer and program in circuit.

On the bench will be the next step. For now I used the test points on the other side of the board to add a socket. This allowed me to sit in the car and just take the chip in and out between loads.

I got the mileage correction figured out most of the way. I can get it very close but cant seem to figure out how to get those last digits right. I did spend a ton of time hacking and was able to disable the VGRS Warning. I was also able to find the values to fix PCS, LDA, and one other warning i cant remember off the top of my head. i have it documented on my laptop at work.

Hello from across the pond. This is the first thread I've come across with some really solid information. I have a Fsport cluster for my base 2014 is. The cluster works fine except getting an alarm for the vgrs system which i do not have and the mileage correction. I'm sure I can figure out the mileage correction. I'm hoping the vgrs system enabled or not is also in the eeprom. I'm going to try loading your dump and see if it works to clear that up. If you go to the techstream live data you can see a parameter for vgrs present or not present but no way to change it through techstream. Only solution I suspect is to load a dump from a fsport that doesn't have this feature.