wiccan2

That all looks fine to me, as others have said the car sits high because it's an SUV. My 400h looks just like yours, lots of spring visible.

Just had mine done last year, I think it was in the region of £700 for the cambelt and water pump at the independent near me.

Unfortunately not. The Bluetooth functionality is limited to phonecalls only. I was using a Bluetooth cassette adaptor to get music into the system but just recently installed a Grom Vline 2 unit which lets me use Android auto to get music.

Thanks for the tip, I've checked and it looks fine. Just done my first long trip in the car, 240 miles and it ran fine.

It's all fixed. The dealer was about to book the car in with an auto electrician on Saturday but when I started it in the morning the errors had gone away and everything was working again with no need to do any initialisations. It's been going great since The dealer said that on the morning I bought the car there was a bit of condensation. Only thing we can think is this got into the fuse box and eventually dried out. We did read a code for CAN bus short to positive, so that seems to back up the thinking. Thanks all for the help.

The car was bought from a dealer who is coming over tonight with an ODB diagnostics tool to read the codes. In the mean time I've got my own ODB scanner working and I have multiple U0146 codes. This led me to the following thread where someone is having the exact same issues but there was no resolution: The full set of codes I read were: ============1============== U0146 Raw code: C146 ECU: 7EA Status: Confirmed OBDII: Data bus, gateway A - no communication ============2============== C1241 Raw code: 5241 ECU: ABS control unit #2 Status: Confirmed Lexus: IG Power Source Circuit (MR, Cel.) ============3============== C1310 Raw code: 5310 ECU: ABS control unit #2 Status: Confirmed ============4============== U0146 Raw code: C146 ECU: Hybrid engine system Status: Confirmed OBDII: Data bus, gateway A - no communication ============5============== U0146 Raw code: C146 ECU: Motor generator Status: Confirmed OBDII: Data bus, gateway A - no communication I will see what the dealer says tonight and push for him to get an auto-electrician or Lexus to take a look.

Hi all, I've just bought a used RX400h and after getting out home the 12v battery has died. The seller has now fitted a new one and the car starts and drives again but I am having issues with some of the electrics. I am unable to adjust the mirrors, open any passenger windows from the drivers controls, lock the doors from the drivers controls (passenger side switch does work for this though), and open the rear power door either with the button on the dash or manually from outside. All of this was working before the battery went dead. I am now also seeing check hybrid/VSC errors on my dash with a master warning light lit also. Other electronics such as the entertainment system, seats and internal lights seem to be working fine. The seller managed to initialise the windows and get those working but this had stopped working the next time I went to the car a couple of hours later. Is there anything I can do to resolve these issues?