blimft

How much simpler can I make it, you plug it in, crimp two wires done You don't even need to connect the orange one. Not even the blue one, but if that isn't connect it won't auto tune to stations. i see what a scotchlock is now...sorry....but are the aerial harness and dimmer wires colour coded or are they obvious?...i wouldnt want to crimp into the wrong ones. btw would you believe i have a degree in engineering? lol thanks guys

so you mean they go into the new head unit?...what about the aerial connector? No mate, the blue one (aerial) needs a scotch lock to the thin black cable on the aerial harness in the car. The orange one needs attaching to a circuit that dims, mine is attached to my edfc controller but you could attach it straight to the dimmer switch by the drivers leg. hmmmf...sounds a bit technical...i thought it would be a simple plug & play operation to bypass amp to now h/u.

so...to get to the amp..and attach the bypass lead, you only need to squeeze the glove box sides to release it?....is that really all it takes?

so you mean they go into the new head unit?...what about the aerial connector?

hey iceman...did you figure out where exactly to attach those two extraneous leads from the loom?....i guess there wont be any detailed instructions

yeah, amazing technology, ***** piece of kit.... tbh, i am gobsmacked that lexus seem to just pass this all off as nothing, and accept no responsibility. After all this is a LUXURY top of the range motor car, built to the highest standards with the finest materials...isnt it?? The CD unit has a design FAULT, it does not perform as it is supposed to, under trading standards regulations they should be held accountable, surely. and furthermore, i cannot get my head around the reaction of Lexus owners to this problem...Oh yes, err3 problem, very common £300 for repair...there you go, have a nice day...i meeeeean....come ON!!! no-one seems to know just what the fault is...and what exactly constitutes a £300 repair bill. I bet there is a reset switch somewhere and someone is taking the mick, its tantamount to extortion.

i had err 3 which had all 6 discs in there, i took out the unit & managed to retrieve them, but since then it still thinks its fully loaded. Did yours reset itself after you got the cd out? Did yours reset itself after you got the cd out?

i had err 3 which had all 6 discs in there, i took out the unit & managed to retrieve them, but since then it still thinks its fully loaded. Did yours reset itself after you got the cd out?

i wouldnt think of buying a new one..i just wanted to put things into context, it just seemed very coincidental that his unit showed exactly as mine did. i do have the option of £275 repair of my unit i guess...or replace with aftermarket+adaptor lead. Still not sure about whether people like the new sound. and the cost would be about £200+

hi all i bought new 13902 h/u from ebay, to replace ERR3 unit on mine, guy said i could collect and see it working (fair do's). Took my car over, switched units, but as soon as i plugged in, all 6 cd's shown as loaded and ERR3 came up when CD button was selected...EXACTLY the same fault as on my unit. NOW...here's the thing, the guy was adamant that he had seen the unit working and i have no reason to doubt him. SO...do you think it is possible that the fault may lie somewhere OTHER than the head unit? if i were to purchase a brand new unit, for example, and plugged into my IS200, you think it's possible that i will get the same error?

I was quite liking this model...seems to have everything, i dont want bluetooth or anything like that, but it has power, HPF & LPF, MP3/WMA...even looks like u can change colour.. what do you think? http://caraudiosecurity.com/shop/product/p...ts_id/4499.html and...are you all quite happy with the IS200 setup just using the lead and the head unit?

that would be excellent!... i am in south yorkshire ...and you still get good bottom end?...and what head unit are you using?

i hope tis thread is not dead now....i am holding out on buying this wiring kit and h/u until i can get a good concensus... my h/u went err3 a while back (£275+ for repair), so this is why i am thinking of new h/u and wiring loom. BUT, if the sound is going to suffer, AND i m spending £200+ for new kit, well.....what do i do??

sounds like good news codlord, which pioneer h/u you get?...i like the fact you can adjust low range etc for the speakers. ...so just a straight forward swap and no real reduction in sound quality?

Thanks iceman, do you still get the solid bottom end that you get from the oem system?...and would the aftermarket h/u drive the speakers ok?..

Thanks monsterMat...brill reply, straight to the point, just what i need to know!...any tips on replacing/rewiring speakers?....i am quite happy to leave stock spkrs in, to avoid the hassle I dont mean the standard Iso lead...maybe i am using the wrong term...this is the lead off ebay, designed to bypass the amp on IS200 SE.

anyone know if the ISO lead powers all 8 speakers?....and whether the speakers get all the frquencies at once?...

so just coaxial all round'?...or comps etc?. in light of comments about how the lexus is put together, i would rather poke myself in the eye than try to replace any of the speakers. So the ISO lead sounds fantastic, but i was curious as to how much work would be involved. and what the options are.. any other thoughts?

Hi all Very interested in the ISO lead for IS200 SE, (ERR3 on mine). Couple things i wanted to confirm 1) i thought the internal amp split up the signals & distributed them around the speakers, and that was the problem with replacing the amp. and also what made the system sound so good. 2) most people who have replaced h/u with after market models are presumably running from h/u now, hence full frequencies to all speakers? 3)is it possible to install a new amp? and how would that work out with he existing speakers? ( understand that the rears are separate units with different ratings. sorry there's a lot to go at, but i want to replace my faulty h/u but dont want to sacrifice the great sound. cheers

yeah, i think i can help with this..the 13901 refers to IS200 s model with out the external amp & only 6 speakers. The 13902 is the model for the IS200 SE. Lexus Sheffield told me that they are NOT compatible. cheers

I have had err3 on my unit and intend to buy a used unit to replace mine (Is200 2000reg) i have seen a couple (bottom slot, as is mine) but the numbers are 13902. the number on mine is 13905. Will either of these be compatible?...i understand that the connectors are different on some. and you should match up the numbers on the unit. Does it have to be an exact match? cheers in advance

Hi everybody! i had the err3 error over the weekend while i was on hols... no mechanical sounds at all..anyway, got home, removed the unit (thanks for the instructions) and managed to get all six CDs out. NOw i have put unit back in, it still thinks it is loaded up..so cant do anything! My question is... is there a way of resetting its 'memory'?...i disconnected battery lead, but no joy. Mine is 2000 V plate, IS200 SE cheers

Thanks alot for your comments guys. I had them check this out together with a couple other niggles and they say it needs regassing and are making arrangments for that, so fair-do's i guess. (watch this space). Incidentally, is regassing required often?

Thanks you guys...i had it checked out today by the garage who sold me the car and they say bearings etc are ok and could be tyres. Your comments seem to bear this out (bear?? get it??). Anyway, although i am still a bit suspicious, i guess i'll hang on till tyres need changing and hope that cures the problem. Thanks again for your comments

its certainly worth a try before i start barking at them..thanks, i'll give it a go