jamie07800

Your colour code has some pearl tinters in the pigmentation so puting a solid black bumper on your car is your own choice but you will notice in the sunlight and yes as stated it will have wear and tear marks.

If you havnt already sorted your issue i have a breaker seats are not best condition but its all there im based in dartford m25 if that helps ? But as stated i can confirm plug and play, 4 bolts and i think the passenger is leccy too

Thank you so my options are sell or scrap 😪

Just my opinion but if you have solved your problem i would do tyres and wheel align at same time. If you still have the sqweek from brake just check the dust plate surround is pushed away from disc and ask the technician to use an air blower around the caliper incase any debris/metal clip is in that area and you cant see it may blow it out. All the best

I have owned and maintained is200 for over 10years and still to this day never misses a beat, cant fault it at all and has 180,000 miles on clock. i have seen numerous people in the trade buy the is200 as they are ulez exempt but the reg dates are 54-55 auto. Mine is manual 1999 on an X and the only difference is what they have is auto. My vehicle has no euro status and i have sent relevent documents to TFL, they are asking me for a conformity certificate. How do i get this certificate ? As i have been told by 3 MOT testers the emissions are fine and it should be compliant just want to know if anyone else has ulez compliant is200. Any help regarding ulez much appreciated.

fault finnaly sorted !!! with the help from a trusty multimeter found a 10 amp fuse drivers side footwell blown !

checked all fuses and disconnected battery to reset ECU ! still no lights and i dont have rear lights either only lights that are working are headlamps main beam and breaklights any help greatly appreciated thankyou

help needed please on replacing passenger dip beam light or side lights (not main headlight) not sure wot has happened possibly water in wires, but now i dont seem to have my sidelights and neither are my fog lights but my main headlamps and highbeam work fine so do hazard lights just no sidelight or fogs any help appreciated thankyou any fuses that i could check ? thankyou

thankyou rory i will check all thankyou for quick reply greatly appreciated !!!

recently on applying my handbrake the light on the dash displays (!) when handbrake is off the light goes off on the dash but wen i drive the light appears again and also if i drive for an hour or so when parking the car switch off enging get out close all doors press the lock button on key the car wont lock but i can hear a clicking noise but it wont lock i have to get back in lock all doors from inside then shut the drivers door lock it by inserting the key then if i press the lock buttong on the key the alarm arms itself all the indicators flsh all is good, it unlocks ok but still doesnt lock or arm itself i have to keep getting bk in and locking from inside ! :shutit: anyhelp greatly appreciated thankyou jay

ok ive been doing the same with my headlights only i found an old post saying 7minutes at 250c, my driver side was ok was a big struggle to prize apart and wow theres alot of glue on them the second went totaly wrong and melted after only 5minutes :o so if u know where i can get a nearside front light plz plz plz let me know if not looks like will have to wait till monday and go main dealer ! so a note for first timers keep checking !!! and yes my oven was fan assisted

has anyone used this company before ? are there parts anygood ?? http://www.extremedimensions.com/shopdispl...ype=Body%20Kits various kits from extreme dimensions was thinking of buying some parts not sure about quality tho ?