bixtape

Hi Linas , hoping that’s not your 250 ? I need to replace driver side window on my 2011 250 f sport , as it’s scratched it keeps being scratched on the outside when you pull the window up . I’ve got to take the door apart to further inspect but was wondering if you still have the window and how much would you want for it ? Also I reckon it should fit with no issue right ?

Bought a pair of front calipers from rock auto without paying attention at the size and it turns out they don’t fit my new discs and pads therefore looking to sell them . From what I’ve seen powerstop are highly recommended by the Americans and compared to pagid , this is a bargain as the callipers come with the brackets as well. Cast iron 60-32 Wanting £170 and can deliver / ship at buyers expense. located in sunderland

Hi guys , I've seen other threads about head gasket issues , however I'm not yet sure if the head gasket is on its way out or it's something else , considering all the issues I'm having . So about 2 months ago I started hearing squeeking noises and replaced the serpentine belt . After a month I started noticing whine noise on a cold engine and identified the water pump is on it's way out - just replaced water pump (aisin ) , thermostat ( aisin).The mechanic found out as well as the old WP leaking also the radiator h as been leaking and the tensioner pulley on its way out. I've taken a screenshot of the video he took. After all he's taken out about 5L of coolant from the system. He suggests that it's been like that for quite a long time (months) and I do admit topping up a little bit of coolant (some random one from halfords which I kinda regret now )few months ago and when he checked the radiator hoses , they were very hard for a car that sat overnight with a cold engine . He suggests that potentially the head gasket is on its way out and I should check with a garage that deals with these kind of stuff to confirm whether this is the case or something else. The car has never overheated , the temp gauge has always been reaching almost the middle ( just a tad bit before the middle) just like all other 250's and now having the new thermostat I don't think there would be a case of missing overheating. However I do have secondary cats as some of you might know that need changing , exhaust leaks and one of the downstream o2 sensors dead , which needs changing but everytime something like this pops up and I keep delaying it. I do experience a slight jump in RPMS from second to third gear , as there's an issue with the throttle body , however I believe that's because I'm running rich / exhaust leaks / cats needs changing. My question is - should I buy a head gasket tester kit ? If yes - which one would you recommend , or should I go to a garage? I will be replacing the radiator in the next few days , can someone vouch for the brand Nissens having a good fit and reliability ? Should I replace the radiator hoses ? I'd be very thankful if you can point me out in the right direction, because I really don't want to be selling the car , I love it and I have no idea what car I would enjoy as much , but if identified 100% head gasket issue , I see no other reasonable solution

Hi guys. So one of my caliper is on its way out and need urgently to get it sorted. I’ve got the calipers from rock auto but I’ve just found out that getting brake lines for the is250 is an absolute pain in the *****. Was thinking about getting braided ones but was told it will take a month to get them , so I’m screwed. I’ve just ordered Borg and beck from eBay which might come in time for my appointment with the garage and I’m wondering if they would be any good ? is it worth putting them on or keeping the current ones I have to then replace the calipers and eventually order the braided ones and again do brake line replacement ?

I understand now Linas , thank you for clarifying this , I've never dealt with this or had to research so I was quite clueless , but I got it now haha. Thank you so much for your input I know what the plan is , now I just gotta do my research for shops and not get ripped off , thank you . I will update this thread again once I've got progress with this and will probably summarize the whole issue at the end so the next newbie like me finds it as helpful as possible !

@Linas.PMy rear "exhausts /pipes" are new , i went to a guy who did it kind of properly ( still small leaks at the welds where the backboxes were , but this time much better...) if ive understood right you are going custom stainless steel for the centre and rear done by a shop right ? I know a reputable place close to me but I was quoted for a backbox delete £700 + and without the tips , so I'm crossing out this shop for sure . I'm just wondering if there are already complete exhaust systems ready to be purchased from a reputable website ? Or it needs to be custom as the shop needs to deal with the flanges too? Edit: just read your reply after I posted this. Should I just freaking buy all the pipes needed to do the custom exhaust system and do a small trip of 5 hours to my pal who I trust the most and know I won't get ripped off or mess it up ( he's a welder for redbull haha )

Yes vlad , I've went with denso from rock auto with the advice from linas , he's been super helpful so I'm taking the right decisions now hahaha So that exhaust system gotta be like custom or... ? Is there like a reputable website for our 250s where we can just get them from ? Or welding needs to be involved too?

I am in no rush so I'm going to repair the whole issue , I'm not giving up on this baby , I've put quite a lot in it and been taking care of it ( apart of trusting wannabe welders ) and not planning on changing the car in the next at least 2 more years. ( 2 years , and 25k miles so far ) By changing the whole exhaust system do you mean the headers too ? So I'm going to do my research to replace the cats that have the exhaust leak with brand new ones , but changing the headers too , isn't that a massive pain in the ***** getting to it and also quite expensive ? By the end of the month I should've ordered the cats but I doubt I would be able to deal with the flange on the side of the headers... It will have to be following month most likely....

Wow man I'm so glad exactly you have the same issue like me and I'm saying this in the nicest possible way 😂😂 I've been thinking about this and decided that if welding can fix this issue I would travel , before you said this lol You are the guy who i trust the most to be honest , what would you suggest is the best way to go in my case ? I've got a friend of a friend who's a really good welder however he's 5 hours away from me , but if welding will resolve the issue properly then welding it is . I think either ways the flange at the downpipe needs to be dealt with , even if I get new cats , I'm sure that old rusty flange will cause a leak in future ....

I hope you can see the pictures through this link as for some reason I couldn't upload them directly onto the thread https://ibb.co/sWh0hjg https://ibb.co/DYfXj4q https://ibb.co/dLVCWpm https://ibb.co/VpRgB4m https://ibb.co/k5yX14J

Hello guys long time no see . I haven't updated the thread but the time has now come and I'm financially ready to spend more money on this car 😂 I've finally received 2 denso downstream sensors to replace them with the hope to fix this whole issue . HOWEVER , due to me being fixated on the exhausts i've overlooked the pipes around the o2 sensors and have now found a leak before bank 2 and now everything adds up. The situation is not looking good . I didn't proceed with changing the o2 sensors as per my discussion with the legend @Linas.P there's no point doing so since there's a leak and also who knows how much metal Is actually left in the area. I think the story gets even more complicated in a way now than before and I really need help your help guys Here are pictures showing the flances at bank 2 . It is clear that new cats are needed but what worries me if I'm going to be able to attach these new cats to the old flances? Considering how bad the welders in my area are , I don't think there's a point for considering of fixing the exhaust leak ? How should I go about this ?

I'm looking into buying 4 new tires as well . From what I've read it seems like you can't go wrong with the continental premium contact . I've got my eyes on 6 and 7 gen. Looks like the newer gen 7 is more loud but currently couple quid cheaper at halfords £110 per tyre with fitting . I'm thinking about going with the newer gen

Right so after reading everywhere, I decided to risk it and change the lower control arm bushings with the rcf ones from Japan for £90 as so many people recommend them. Can confirm this fixed the wobliness and the car feels spot on . There was no play when jiggling the tire left to right , up and down , also no noise when moving the tire while the car being lifted. The squeeky sound has to be from the brake pad as I broke one of the anti rattle clips. Trying to find new ones at reasonable price to them along with my brake pads as maintenance. The old bushings seemed OK, but had very small cracks compared to the new ones. Highly recommend anyone experiencing these symptoms and hasn't changed these bushings to go with the rcf ones. I'm pretty sure all 4 wheels now need wheel alignment and new tires . Will be buying new tires in August. Should I wait to fit them and then do the alignment or just do it now?

Yeah I can tell that they weren't very competent.Just remembered , the mechanic at kwikfit suggested the outer wear of both front tires could be due to that they are different brands? Even though they are the same size ? Lol So the plan for tomorrow is when I get the car lifted I will check the bushings ,ball joints and wheel bearings on both sides as well as checking for leaks from the shock absorbers. I've been considering getting 4 new tires. Any suggestions for the fsport 18" wheels , considering last winter ? I'm on a tight budged as I got few things going on 😄 Either ways the alignment will wait till I get new tires and this time it won't be kwik fit for sure lol

Sorry forgot to mention the wheel alignment . 4-5 months ago the car was feeling strange again but I did alignment for the front which made the car feel smoother. I went again a month ago as they do free checks and the outter tire wear was showing more and more ,the front was spot on and the rear were in red again but was told it's normal and they are within spec. Only thing I was told is that the rear bolts are rusted out and might be an issue aligning them and also the lad suggested . When I go back home I'll search up for the picture to show you the alignment. I do drive quite a lot and do hit potholes from time to time but what are the odds messing them up for such a short period. I guess it's worth going again to kwikfit to see if maybe indeed they need another alignment , it's free and is opposite my house so not a big issue.