jay_russell

thanks for the help guys. will go and check it out lated at work and see if it works. jay

can anybody give me the color codes for the oem head unit so i can put in my new head unit i cant find any amp in the car and just need to know what each color coded wire is for many thanks in advance jay

yer thats what i ment.... glove box is in the back of the car... but lhd rhd ? if it was the same.... looked at the thread on how to remove it and it has lhd in there but was not sure

so I've had a look and nothing....... i have a 2004 se lhd and wonder if anybody has any tips as to were it might be. checked in the glove box and it's not there and looked around and cant find one. i thought i would ask the question because most of you are driving around in rhd cars and maybe one of you might know something thanks for the reply's jay

just as the title say heads up display. got one info on it

yes i did mine 3 weeks a go and you need to solder them in. looks good but when you do it make sure that you have wide leds for the clock as i did not and have to bright blue bulbs shining behind..... going to fix it next week. i work for toyota and sourced the bulbs and they dont have blue..... sorry i brought some t5's and cut away the plastic to leave the bulb and resister then soldered them to the board. works well but the clock is bad so will get the solder out again soon.

i got one oem and the kit contains all you should need, mine came with a black out plate for the center light and a unit to fit for the bulb warning light as well. i just used the black out plate so i have the wiring unit if you dont get one with yours.... not so hard to fit but better to have two or three people so that you get it straight 1 guy on the left and one on the right and the guy in the middle to fit it down. mine also comes with stickers that help you fit it for drilling but you could make some up also the light comes with a plug to connect straight into the center light but you can make a black out plate from some black plastic just remove the light from the back and take out the red brake plate and make a template and then find some think black plastic... 3mm and just cut one out and fit it in the place the red on sat good luck

hi been thinking of putting in a start switch and need some help if you have done this or know what i need to get this working http://cgi.ebay.co.uk/ILLUMINATED-PUSH-BUT...%3A1|240%3A1318 this is what I'm thinking of getting and need to now how i go about making it work ie what else do i need thanks for the help in advance jason

has anybody used one of these and does it work.... this is not the bypass harness but this one works with the amp would like to know if you have used it and had any problems http://cgi.ebay.co.uk/04-07-TOYOTA-LEXUS-J...tem380104201211 many thanks jay

sure the best thing is to go down to your local toyota workshop and talk to one of the guys working there.... you will need one working key and the unprogramed one... slip him 10 quid and he will copy over the info to the blank...... or you can send me both key and i get it done for you here..... i work for toyota....... but im in sweden........ good luck