BigDingus

I don't have google chrome, but I've tried an old version of IE, Firefox and Microsoft Edge. None of them do this.

I may have to just have to install Chrome.

Herbie I've now been able to try 3 different browsers. All the same. No English. Shame as would have bought it.

My search continues.

Thanks for trying though.

Thanks Colin

Hi guys. 

I’ve trawled the internet for information on this. The wiring diagrams I’ve found are really poor.

My suspension compressor isn’t running. I’ve found that the suspension relay isn’t being switched. 

The relay is good.

When the load side is shorted the compressor runs ok.

If I put a supply to the positive side of the relay switch+ the pump works ok.

So the conclusion is the relay isn’t receiving a trigger signal. 

My problem is, where does this switch signal come from.

If anyone can give me a hint please.

Well that was an ordeal. Finally found it behind the rea bumper on the drivers side. 

OldTrout that’s exactly the ones. Saves a fortune. 

Guys I mistakenly asked OldTrout a question instead of Lukas. 

I've now messaged Lukas direct. 

In the meantime if anyone can tell me where to find this solenoid I’d be grateful.

Ok I shall

Thanks Herbie but I couldn't understand a word on that site, let alone order anything.

No English button

Hello folks. 

Im about to replace an ECU for my suspension on my RX300.

Having check one knew from the dealer (£800) I decided to try a bid site. 

Here lies the problem. The part I need is 89293-48012 but the parts on bid are 89293-48011 and 89293-48013. 

Close but .........

Can anyone tell me if this digit is significant, or are the parts interchangeable?

I’ve finally managed to find the air suspension module. 

It hides behind the panel at the driver’s knee. (See photo)

I’m posting this for others in the future. 

Thanks Bluesman

No then

That'll be no then

Could someone identify this for me? Obviously a ECU, but which one?

Delph I removed a good Parrot system from a car I was getting rid of, so I could fit it to the replacement one. So all I need is the cable between my car and the parrot. 

I think it's called an ISO

My connectors see attached 

Remover to edit. Can't delete this post

Hi folks. 

Im having ride height problems on my RX300 2004.

I’ve striped and cleaned the ride height sensors. Remade the large connector block at the pump.

Now i want to reseat and check the connections at the suspension ecu and pump solenoid. (As seen on YouTube)

Can someone tell me where these are located?

Hi Oldtrout. 

I have the exact same problem, and thanks to you I can investigate the same. 

Can you show where this solenoid is located please?

Thanks

Thanks Delphious. I too found this but not the correct one. 

I had the same problem on my IS300.

Simple solution.

Take the old rod off and measure the rod or keep to compare.

Buy some thread bar the same diameter as yours then just get 2 ball ends. Remember to make one left and one right handed.

Sorry I can't give you the links to my old purchases. From memory is cost me about £5 total.

Can anyone tell me the size of a bleed nipple on an RX300.

One has been rounded by someone in the past, so I'm going to change it.

Help. I just got myself an RX300 2004 for my other half, which because of its year doesn’t have hands free. (The car not the wife)

I have a Parrot system I’m looking to fit. The problem is I can’t find an ISO cable to fit it. 

Ive done all the usual google and eBay but I still can’t find one. 

Does anyone know where I can source such a thing?