Delp

Pressure all checked before doing alignment. All same speed rating. Tyres are same brand on front and both same brand on rears. There done it twice. Know there suggesting swap the wheels over first. The steering is sitting to the left and when I centre it pulls to right. Has anyone got the factory alignment specs. I try post a few pics.. I'm going tommorw but feel it's going to be a, waste of time..

Kind of understand what your saying, never heard of anything like that before 😄

Anyone help.

Rock auto in the states are good price. Never ordered but heard good things. U. K not sure,

Sorry I don't quite understand light stork, equal positions I bit lost there my friend? Quoted extra. ☺

Lexus GSMK2 Had my alignment done twice. Mentioned twice that steering is not sitting centre, it sitting to the left and I have to centre it then it pulls to the left. They did do it second time same issue He did centre the steering with a lock then adjusted the toe. The camber he said the bushes in the lower arms no 2 rear were shot and couldn't be adjusted. Can anyone look at the pics and advise please.. 1st pic before they started and last pic when alignment done. And I'm sure he said caster cannot be done on these. Unfortunately there printer was off the blink so I just took some pics. If the readings are not right I will going in with the info. What are the factory alignment specs of the GS MK2. All factory standard.

Cheers for the replies. I think I might have solved the issue. There was metal/coins in the centre arm rest. Emptied crap out it seems to be good at the moment. There a subsonic sensor under the centre arm rest anything metal causes the sensor to go off. I keep posted if it doesn't work.

Hello my GS MK 2 alarm keeps going of every 30-40 minutes. Is this a common problem if so what could it be. Any help be appreciated.

Cheers got some on order 2001 and will compare the two casings see the difference,

Hi looking on how to make this look better. Any advice suggestion reply to thread. I think it's paint cracking. Its in other places also. Not sure on how to fix it up.

Hi my GS 2003 are two piece. Im sure 2000-2004 are two pieces and years before are one piece. Mk1 GS is different fitment to the body.

Any ideas?

Hello there does anyone know if the wing mirror casing on the GS pre and post facelift are one or two piece housing.

I took the striker plate off and it won't move anymore than what it is. What do they mean by using the other bolt that bit I couldn't understand. Would section 2 and three apply then?

They are sitting out a few mm..

Cheers Steve a link would be good for future use. I found this online not sure on how to do it as it mentions using centring bolt instead of standard bolt. Mine need adjusting vertically..

Hello is there a guide on how to adjust front doors as mine are sitting out by a few mm?

All good sorted know. One of the linkages had popped out.😁

I can't here the click when brake pedal is pressed also.

Checked all fuses there all good. This happened when I was putting it gear shift assembly back together. Key is stuck in only can remove if battery off..

Hi all I had the centre console for auto transmission out to change few bulbs. After changing the bulbs started her up and the auto transmission is stuck in P. My brake pedal when pressed doesn't allow it to shift gears I have to hold the Interlock button to shift gears. I think I must have but a spring for the lock somehow wrong also can't get my key into ACC or OFF have to disconnect battery to get key out. Can someone guide me how to put this spring in. Or even better a photo of another one installed correctly. Highlighted is the two bits that I think I've put in wrong. Shift lock release link and shift lock release spring..

Hi all been busy at work so no update on the mod. I've been looking into the OEM mod and would like to do that but don't really want to mess with the ECU too much.. so I'm going to tackle it with a dpdt switch and piggy back tails. My question is which piggy back fuse would be safe or if there is a empty fuse slot that any members know of in the kick panels. What size gauge wire should be used.. any advice be appreciated 😁

I will have a look in more detail as I never thought of it like that. Other GS owners have done it so I'm pretty sure it's possible.

What you think about using dpdt switch and relays or JDM power folding relay?

Hi Chris I thought it would be. exactly were did you get the manuals from? If not I'm thinking of wiring it via dpdt switch with two relays. Or buying a JDM power folding mirror relay and dpdt switch. Some owners have done this on others forum. Not sure if it would be safer to do it with two relays to protect the life of the motor. 🤔