lexus stereo

ok,i'll try tomorrow,it seems difficult to fit it in,tried at least 5 times tonight and gave up

Hi all totally baffled by this,my mate had my car whilst i was on holiday and he had to use the spare,since then i can't get it fitted back into it's rightful place,i thought i had on the wrong tyre but it's a 215-45-17,the original size on the SE,what am i doin wrong?

Someone has offered me these,not fibreglass all original stuff,the rear bumper has a slight imperfection nothing major,the sideskirts in good condition,just need painting,what sort of price should i be paying?any ideas would be welcome

No worries mate,some nice sets on ebay right now

Those pics are old i've had the caps fitted with the Lexus logo now,i'll post them up later in week

I had my pcd altered by TT tools in Chelmsford,no need for wobble nuts,proffesional set up and it only cost £50.00 for four wheels,it took about 45 mins to get them all sorted. www.tttoolsltd.co.uk.....you'll need spigot rings and as Ormi said you'll need to use 215/40/18 tyres..Offset (ET) of wheels, Increased or reduced The Wheel offset is taken from the wheels centre line and measured to the mounting face of the alloy wheel. There are two main offsets Positive and negative, We can create both, either Increasing or reducing the offset using our CNC Machines. Using our CNC machines we can Skim 5mm off most pre-drilled wheels, (ie. ET35 to ET40) Blank wheels can be machined to almost any offset.

It can be done quite easily

Here a some pics that i took recently,one with the buckled aeros that i had lol,i really like the wheels,and a lot of head turning going on,im gonna put some longer studs on at the end of month.I know not everyones taste but each to their own,to me the car looks much more meaty and square,im lovin it....

My one got binned,try lexus dealers

This is unbelievable,either nobody knows or who knows ain't telling,which one? anyways i'll be at breakers on Mon afternoon and collect a few so i'll come with the measurements and even a pic,,LOL unbelievable

I've googled it a 100 times and still it seems,cant find the original dimensions,a real big secret imo..lol

Hi,I've been searching the forums with no luck.Does anyone know what the dimensions of the Wheel studs are eg overall length,thread length,and spline? I,ve put my alloys on but need a little extra length on the studs,I've seen these don't know yet if they'll fit....http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300517390381&rvr_id=225358377645&mfe=sidebar

Yes Ormi,i was just waiting for you to get home from work lol.My car is lowered by 40mm,i thought i could get away with the 225,cos the wheels are 8.oj

Hi all,my previous post last week stated that the wheels i was getting were 8.5 *18j ET 35,well i got the rims sat evening and they are actually 8.0*18j ET 35,I was told that i would need 215/40/18 tyres,is that still the case considering they are only 8.0j,i haven't got the tyres yet as still unsure.I ordered my spigot rings and expecting them on weds,they were supplied by Ebay seller missfunky2010,my wobble bolts +locking are to be supplied by Paul at Regal Auto sports,I hope you like basically once i confirm from someone knowledgeable about the correct tyre sizes i will get them,Thanks again

Thanks mate,sorted

I decided to change my wheels which i should collect on Saturday.I can't find spigot size that i need anywhere,the size i need is 66.6/60.1,does anyone here know where they do custom ones,thanks

ok thanks 215-40-18 tyres cheers

I've seen some rims that i really like,i can get them in a couple of weeks time,im a bit unsure of the fitments i've done some searches and from what i have read it seem that it can work but just to be careful here goes,the wheels are, 8.5j ET35 with 225/40/18 tyres,can i throw them on without problems?,my car is lowered 40mm all round,thanks in advance

Hi all,just really checking,been looking at some 18' rims but been told the ET is 41,will it work on the is200?

ok thanks will check with her

I would think -: No reverse parking sensors no beeping sounds. Someone would correct me if I am wrong. The beeping is only in the car and not as a warning externally. With the reverse parking sensors it aids the driver in knowing how close he/she is to an object as opposed to warning someone that you are reversing. Ok,mine does have parking sensors,hers doesn't,i thought once you engage the reverse it gave the driver an audible sound,my bad..

Hi,my Sister just bought a 2000 is200se,i noticed when putting it in reverse that it never made no reverse beeping sounds,also she wants some parking sensors fitted seen some on the bay but any recommedations or are they all just as good /bad??

Ok,got most of the info i need now,thanks again

Yeah Ormi,there oem merc monoblocks,they always come up on the bay but i've noticed that some of them have different offsets,are you saying the offset won't matter as long as i get the wobbly bolts? Thanks for the link,thats a real low rider

Hi all,i've been a member for a minute but never put no pics up of my little is200 se,i was planning to sell her recently but had a good clean up and decided to keep her for a while longer,if and when i do sell it will be for another 200 or 300 but different colour,anyway it's a 1999 (v) se,had her for 2years now and bought her with only 42000k on clock,i've got one question after pics..... ?? What wheel ET (offsets) can i use on the is200? as i would like to get some of these wheels or similar,see pics