Do Not Sell My Personal Information Jump to content


Need Help On My New Bcc That I Just Got


gotparts?
 Share

Recommended Posts


i dont have the proper pin out for my jzs161. my question to you guys is what wire is the tps that i need to tap into and what wire is the turbo pressure sensor i need to also get to? any ideas anyone?

Depends on which version of the 2JZ-GTE you have ... whether it's the one with the VVTi or the one without. If it's the one without then you should be able to use the Supra wiring diagram, if it isn't...I'll post up a picture of the wiring/connectors on the ECU later on.

Link to comment
Share on other sites

i dont have the proper pin out for my jzs161. my question to you guys is what wire is the tps that i need to tap into and what wire is the turbo pressure sensor i need to also get to? any ideas anyone?

Depends on which version of the 2JZ-GTE you have ... whether it's the one with the VVTi or the one without. If it's the one without then you should be able to use the Supra wiring diagram, if it isn't...I'll post up a picture of the wiring/connectors on the ECU later on.

its the vvti one. i have in my hand the greddy bcc. there is no adjust ment in the front but if u take it apart there is an adjustment screw under neath the cover.

Link to comment
Share on other sites


i dont have the proper pin out for my jzs161. my question to you guys is what wire is the tps that i need to tap into and what wire is the turbo pressure sensor i need to also get to? any ideas anyone?

Depends on which version of the 2JZ-GTE you have ... whether it's the one with the VVTi or the one without. If it's the one without then you should be able to use the Supra wiring diagram, if it isn't...I'll post up a picture of the wiring/connectors on the ECU later on.

its the vvti one. i have in my hand the greddy bcc. there is no adjust ment in the front but if u take it apart there is an adjustment screw under neath the cover.

If you take a look at page 1 on - http://www.greddy.com/news/ultimateplugins.pdf - then look for the diagram matching up the 2JZ-GTE VVTi ECU pinout and then reference it to page 23 on - http://www.greddy.com/img/PHP/products/pdf/806.pdf - it should give you all the pin outs you need to fit the BCC onto the ECU :).

Hope that helps.

Link to comment
Share on other sites

i dont have the proper pin out for my jzs161. my question to you guys is what wire is the tps that i need to tap into and what wire is the turbo pressure sensor i need to also get to? any ideas anyone?

Depends on which version of the 2JZ-GTE you have ... whether it's the one with the VVTi or the one without. If it's the one without then you should be able to use the Supra wiring diagram, if it isn't...I'll post up a picture of the wiring/connectors on the ECU later on.

its the vvti one. i have in my hand the greddy bcc. there is no adjust ment in the front but if u take it apart there is an adjustment screw under neath the cover.

If you take a look at page 1 on - http://www.greddy.com/news/ultimateplugins.pdf - then look for the diagram matching up the 2JZ-GTE VVTi ECU pinout and then reference it to page 23 on - http://www.greddy.com/img/PHP/products/pdf/806.pdf - it should give you all the pin outs you need to fit the BCC onto the ECU :).

Hope that helps.

ive looked at that one. it shows just where the power and ground are. i dont see where the turbo pressure sensor is on those diagrams.

Link to comment
Share on other sites


i dont have the proper pin out for my jzs161. my question to you guys is what wire is the tps that i need to tap into and what wire is the turbo pressure sensor i need to also get to? any ideas anyone?

Depends on which version of the 2JZ-GTE you have ... whether it's the one with the VVTi or the one without. If it's the one without then you should be able to use the Supra wiring diagram, if it isn't...I'll post up a picture of the wiring/connectors on the ECU later on.

its the vvti one. i have in my hand the greddy bcc. there is no adjust ment in the front but if u take it apart there is an adjustment screw under neath the cover.

If you take a look at page 1 on - http://www.greddy.com/news/ultimateplugins.pdf - then look for the diagram matching up the 2JZ-GTE VVTi ECU pinout and then reference it to page 23 on - http://www.greddy.com/img/PHP/products/pdf/806.pdf - it should give you all the pin outs you need to fit the BCC onto the ECU :).

Hope that helps.

ive looked at that one. it shows just where the power and ground are. i dont see where the turbo pressure sensor is on those diagrams.

I've got ECU pinouts for the Supra VVTi but NOT sure if it'll work on the Aristo ECU ... if someone else can confirm let me know and I'll email them over :).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...




Forums


News


Membership