Alloy Wheel Fitment

[flipmode]

i have a set of azev alloys that i had on my soarer 5x114.3

they are 8jx17 with et30 on the front and 9.5jx17 with a et40 on rear

there is currently 255/40/17 tres on the rears and 235/45/17 on th efronts

will these go on the is200 without any probs as in ach rub etc?

[ormi]

dont think they'll go on mate they will stick out a lot at the front i'm running an et of 35 which pokes out and i'm running 214 40 for the euro look,your front wheels will stick 5mm further out than mine and your tyre will make it stick out further!!i'd sell them and buy ones that will fit matey sorry.

[Monster-Mat]

i think they will fit ...but as you say, if you already have them...just try it

i have similer offset wheels but in 18 inch on the monster....and dont have many issues at all, other than its lowered quite a bit

[ormi]

heres a few pics i just took of mine at different angles to show you how much mine stick out et35

looking straight down

side view(from back to front)

front view

as you can see the rim sits out from the arch but the tyre has a slight stretch so the tread is under the arch.

tyre size 215,40 all round

[flipmode]

im gonna give it a try tomorrow and see what happens

is that rear arch extenders on the monster or just the way it looks in the pic

[ormi]

ps wheel spec 18" 8"wide et35

[Monster-Mat]

im gonna give it a try tomorrow and see what happens

is that rear arch extenders on the monster or just the way it looks in the pic

they are kind of arch extensions, they sit on the panel, so in effect, they dont really add anything