Neutral Safety Switch Replacement

[LS400ANTH]

Hi Guys,

I need to replace the neutral safety switch this weekend on my LS400. (1995)

Does anyone have a few pointers on doing this....for example anything which needs removing first or tips on how to do it

Anything would be appreciated

Best regards

Anthony

[ROYT]

Hi Guys,

I need to replace the neutral safety switch this weekend on my LS400. (1995)

Does anyone have a few pointers on doing this....for example anything which needs removing first or tips on how to do it

Anything would be appreciated

Best regards

Anthony

This is for '94 series two.

Before you replace the switch check this:

loosen the neutral start switch bolt and set the shift lever to to the N position

There is a line on the cover

Align the groove and the line and then tighten the bolt

the groove is on the lower hexagonal below the fixing bolt, tighten 9ft.llb[13 n.m]

This is the basic neutral switch setting

I think you may have to remove part of the exhaust to replace the switch

[LS400ANTH]

Hi Guys,

I need to replace the neutral safety switch this weekend on my LS400. (1995)

Does anyone have a few pointers on doing this....for example anything which needs removing first or tips on how to do it

Anything would be appreciated

Best regards

Anthony

This is for '94 series two.

Before you replace the switch check this:

loosen the neutral start switch bolt and set the shift lever to to the N position

There is a line on the cover

Align the groove and the line and then tighten the bolt

the groove is on the lower hexagonal below the fixing bolt, tighten 9ft.llb[13 n.m]

This is the basic neutral switch setting

I think you may have to remove part of the exhaust to replace the switch

Great thanks for this. I will look into it at the weekend and advise!

Ant