TommyH

LEXUS IS200 99-

Dip Beam - 9006/HB4

Main Beam - 9005/HB3

Sidelight - 501w /T10/W5W

Side Turn - 501w /T10/W5W

Front Fog 99-2003 - 9006/HB4

Front Fog 2003- H3

Sportcross front fog - H3

Rear High Mounted Stop Light - 955 / T15

Licence Plate - 501w /T10/W5W X 2

Rear Fog - T20 /7440

Reverse light - T20 /7440

Rear indicator - amber 581

Stop/Tail - R580 /w21\5w

Interior Middle Dome - 269 /festoon 31mm

Interior Front - Ba9

Glove Box - R286 / 5mm

Ignition barrel ring - R286 / 5mm

Door Marker lights - 501w /T10/w5w

Boot Light - 501w /T10/w5w

On the back of the headlight their is a little sponge to absorb moisture. Try replacing this with a cut piece of any old sponge.

Welcome mate and congrats on your new Lexus, you'll love it :winky:

Cars are looking great lads, love Moley's plate B)

Hello Jock, this has been covered many times mate.

Have a look HERE,

Hope this helps mate.

Thanks Andy.

Andy could you get me a price for a pair of the dark chrome rear lights,part # 81551-53012-B1.

Thanks mate.

This happened to me last week and i have the original windscreen, with Japan at the top of the screen.

I discovered the rubber, at the drivers side bottom corner, had perished, bits had come away and their was a lot of cr4p gathered under the rubber moulding. I did excactly what true blue said, then bought some windscreen bonding stuff from Halfrauds, cleaned out all the gung, and sealed the area that had perished..

Iv'e had the car washed and it's been pouring down since, and it's still ok.

Joneb- i'm not very mechanically minded but this is NOT hard to do mate. Just take your time. You only need to take off the cover that surrounds your fuse box There are 3 screws under the steering column which takes the under cover off, then where your accelerator pedal is, their is a big plastic bolt that should just screw off by hand. Once you start, you'll see how to get it off. It may not seem wet or damp but this is defo your problem. Just disconnect each connector and give them a wipe, i got into them with cotton buds, then get the hair dryer onto them. JUST DO IT MATE you'll be fine.

Dont forget to check round about your screen to see where the water is coming in, if you dont see to this then it will just keep happening.

Hope this helps and good luck.

Bump ;)

How much does the service cost with the 50% off Marc ?

Try PM'ing Sparkystav, he knows his stuff.

Iv'e used Wullie at CLCM twice, on Ormi's recommendation, and the guy knows his stuff. Car felt totally different on the drive home. Much more planted and my tyres are wearing evenly as they should. Take a wee drive through Marky, you wont be disappointed.

DO NOT USE A SCREWDRIVER unless you want to scratch your paintwork. A credit card is much better and safer.

I also have the top mount covers from the group buy

I had the same symptoms, turned out to be bottom ball joint.

And THIS has just had a cambelt change.

What about a cheeky wee offer for THIS one ?

Is it THIS type ?

Apparantly brasso brings the glass up a treat.

Iv'e got THIS one, 36 led's, nice and bright :winky:

Yes mate, seperate parts, i just needed to change the ball joint.

I had the same symptoms, turned out to be the balljoint was knackered.

Car looks great mate, LOVE those wheels. Keep up the good work :winky: