Help!

[glex]

I want to replace my standard Is200 head unit with a kenwood DDX-6027.

http://www.kenwood-electronics.co.uk/produ...8&k3=57&pr=2070

I know i need to get a double din facia plate and have found the part number 55413-53010, I have a IS200 SE and I am wondering what will happen with the two buttons that active the heated seats and the TRC OFF button. Is there slots for these because all the pictures I have seen of the facia have blanking plates where the buttons shud be.

Also if any of you have done this kinda thing before is there anything i should know before going ahead with the install.

Thanks for your help!

[Pip]

Search feature mate as this has been covered. I dont think the buttons underneath will be affected.

I was looking at a kenwood unit the same.

[ukazn]

Hey there, I've fitted this unit to Fever's car. We used the Autoleads fascia part no. FP-25-00.

http://caraudiosecurity.com/shop/product/p...ts_id/3476.html

When we fitted we bypassed the amp and wired directly to the speakers and power cables. I think Fargo is the man you need to speak to if you need to find a plug and play solution when fitting.