What's The Bolt Thread At The End Of Fuel Delivery Pipe?

[SpOcK]

Hiyall,

My question is simple:

Does anyone know what is the size and thread of the bolt at the front end of the Fuel Delivery Pipe (see red circle in the attached picture)?

Cheers,

Sami

[IHgs300]

Don't know the original reason but some turbo converted guy's tap into it for fuel return to tank.

[SpOcK]

That's exactly what I'm about to do, and that's why I would need to know the thread.

[SpOcK]

Somebody? Anybody? :eerrrmm:

[IHgs300]

Here you go a full list of what you need. Including the ones for FPR.

1. 1x 1/4 NPT to AN-6 (goes to fuel rail)

2. 1x 90 degree AN-6 (goes to fitting on the fuel rail)

3. 1x 15 ft of AN-6 braided line (you'll need to cut and assemble the line and fittings)

4. 1x Aeromotive FPR

5. 1x AN-6 to AN-10 o-ring fitting (input to FPR)

6. 1x AN-10 plug (cap off other input end of FPR)

7. 1x AN-6 to AN-6 fitting (output of FPR)

8. 1x AN-6 bulk head fitting (goes to fuel pump assembly)

9. 1x AN-6 bulk head nut

10. 1x AN-6 to barb fitting (goes to end of bulk end fitting that will be in the fuel tank)

11. 1x 2 ft fuel line that goes from barb fitting to white ventricle

12. 3x AN-6 straight fittings

there's a few pics here as well.

http://my.is/forums/f114/fuel-return-shopping-list-298869/