I had the very same problem found it dangling when being tracked...gotta be a design fault!!! otherwise never knew anything, had the bracket mended the same way (WELDED) ,plugged back in but unlike you ,no warning light..so ok there.. Try unplugging and replugging check wiring to plug might have broken when dangling if no joy there, you will get 15% to 20% off as a gold member!!!(just joined myself!!!)
chaZT
hanks for that, wierd that no light shows when it is hanging off ! will try re connecting ,certain no damage has happened to wires.
If no damage to wires or sensor, the bracket may not be in the EXACT same orientation which defines "level", and can take the automatic control out of range. The headlamps should move up then down to the correct postion when switching on in auto. If they do this but if the "correct" position they settle into is too high or low, it suggest this is the problem. Tilting the sensor should make the headlamps move up and down.
The bracket only fits one way with no play in the 6mm holes,however you are probably right in your explanation about the orientation and automatic control..I can understand that if the switch spindle is not in the correct position when replacing the bracket ,there could be a levelling bias.
When I disconnected the plug the warning lamp came on in the dash,however every time I replaced the plug the warning lamp went out...So maybe a damaged SWITCH, Tony??????