Maximus Prime air lines are they just push and turn? As for getting another garage to do the work I have issue mentioned before, if I remove jack stands from front of car bottom of front bumper is on the deck. Be lucky to get an ant to squeeze through the gap. Recovery for lowered cars is jack them up and but wedges in the coil spring. No coil springs is going to make even more difficult. Can take bumper off to help. Nearest garage that I could find that would do cambelt, water pump etc etc was 8 hours driving from me. So went to dealer. If you look at map of UK find Orkney im right up in that corner of Scotland, part of Highlands and islands. Swapping suspension should not cause to many issues if I do it myself. Have done spring swaps on MacPherson struts that is a very dangerous game. No air in struts being removed. Coilovers already have springs fitted. Got adjustable top control arms to fit on all 4 corners as well at same time. Off with the old on with the new. Will be keeping everything for air suspension refitting. Also bought some super lightweight road rims that look stock to go on. Lightweight rims might take some harshness out of ride by reducing unsprung weight. Next job after fitting this lot is to sort exhaust out. Previous owner fitted a straight through 3" exhaust with 2 straight through silencers. Need to get a resonater fitted to get rid of drone.