Removed The Radiator - To Change Oil Cooler

[GSSPORT]

Hi All,

I had to change my power steering oil cooler (old one corroded and leaked everywhere) and to do that I had to remove the radiator.

The question which I hope someone can help me with is:-

How can do I refill the cooling system without getting air locks? :

I have had this problem before (with an old cavalier) and it caused all sorts of problems.

Any advice greatly appreciated

P.S: The car in question is MK2 GS300.

Many Thanx

[mudzs]

i did mine a few months back and put heater on hot and just filled her up whilst a friend reved car slightly .no aur locks at all

[Einstein]

Fill it slowly....

Start engine with filler cap off, and keep topping up... when the inlet pipe gets warm.. i.e. when the thermostat has opened, the level should drop a bit more, so top up again and put the cap back on..

allow to run for a while, go for a drive if you like, then check again when cold.

John