How To Replace Is200 Doors

[blahmartinblah]

Hi there

I've had some dodgy repair work/paint on my 2 offside doors and have picked up a couple of replacement doors for an OK price. The last car door I replaced was on an 80's Mazda and seemed a fair bit simpler. Can anyone offer some advise?

How about the wiring? I think the wires on my replacement doors have been cut :tsktsk: so I might need to either swap the wiring over from my existing doors, or do a join. Any ideas what is easier?

Hoping someone has done this before...

Martin.

[jay_russell]

just take you door apart and rewire the window and mirror etc with your old doors wiring then put it back together. sounds like the easy way to go

[blahmartinblah]

just take you door apart and rewire the window and mirror etc with your old doors wiring then put it back together. sounds like the easy way to go

Thats what I thought.. but not sure if I can pull the wiring loom for the door out through the small hole with all the connectors still attached. I guess I'll see.. would rather be prepared for it though so it doesnt take several days to complete! Park my car on the street so can't be without a door ;-)

Martin