IRLRs200

All depends on your budget Scott, think Tein basics start from about 400GBP but i've heard they are not great, save up and get a good set for about 600 - 700 GBP

ive heard HKS hypermax 2 and the Buddyclub club ones are a popular choice on the NZ forum, was in a 200sx last week that has Teins on it with the EDFC but they were stiffer than my D2's, and he had them on the softest setting. If your only looking fot a 30mm drop then why not just got some Tein lowering springs

obviously not me but he its real. lucky guys!

Me and the lads were just cruising along over the weekend,.................................

Just curious AM what made you go for the Exedy pressure plate instead of the TRD one? is there any differences they look identical to me

hmmm depends on how much you get them for, they look in good nick but i have always preferred the 5 spoke ones you currently have on

Thought i posted this up before but couldnt find it anywhere. So im getting a clicking noise coming form where i think is the front drivers side caliper, it only happens the odd time and usually at low speeds when i brake and come to a full stop, i was thinking maybe it the pad moving in the caliper(maybe wrong ones were used previously) Anyone know what im talking about or has experienced the same issue, and have a possible solution? new pads on the way soon so maybe that might fix the problem!

Ye these connectors are either for side airbags or electric seats

Bet your well chuffed with that!

tried to sign up but UK residents only. Hope it all goes well and laws get changed

Seller says that it will work on 99-2006 is200,is300, altezza? would definetly be interested in this for mine. But as i have an aftermarket headunit, anybody know would it still work with my setup, and would it have irish mappping?

Do you have an air/furl controller on yours yet? To make the most of fitting an induction kit and exhaust you should get your A/F ratio adjusted to help increase maximum gains, had the Apexi induction kit on mine too but i thought it was a bit too loud and their was bit of hesitation between 3-4000rpm. why not try a replacement panel filter first, see how you get on. Do you mind me asking where and how much you got the exhaust for?

So which is true, about suspension difference?Altezza's not an uncompromised handling/driver's car then, not a homologation special - just fatter engine? Seems there's basic, Z and L. Z and L have better tyres and lots more. Only difference between Z and L is L has 'leather and excene', and an all-leather seats extra-cost option. There's also 6MT or 5AT - 5AT lacks sports suspension, oil cooler, fuel consumption gauge, aero grille, and LSD and TRC are extra-cost options. Sunroof is extra-cost option on all models - what chance of that?Looks like I need 6MT L-pack with leather option and sunroof option. Is that being too picky? Na its not being picky just very hard to find one to match all your needs. Most Altezzas are Z's. Over 100 Altezzas for sale in Ireland!

Cheers for the info Dave, ideally I'd like to go for the Blitz s/c kit but finding it hard to source on at a decent price

the rear chassis brace or strut brace????

Ah that was just a rough guess, considering Lee got 213 out of his at the rolling road in March over here, and i thought the only major mod he mad was the s/c kit

Would a N/A be more reliable and less likely to cause problems than forced induction?

Thats what i thought, the guy i was talking to about this said it would be cheaper than a blitz super charger kitwhich i was originally going for. Lets wait and see what he comes back to me with!

Anybody know if its been done and what parts are involved? A guy in japan is sourcing me a list of parts that can help me get to this but just awaiting to hear back. Anyone have any ideas?

That is quite a loss if its at the fly. Should be about 220 @ fly. Mine has the same torque figure, yours should be a hell of a lot more with the s/c. Did the dyno lads give any sort of clue what could be wrong? Where did you get it dyno'ed? Hope you get it sorted

Nice clip stav are them figures at the fly or at the wheels?

Ok this link seems to have died. Anyone have a working link to an ebay seller for this bypasss lead, my mate is looking for one. cheers

you can buy a keyboard and mouse for the xbox 360 linky Cheaper than spending 2 grand on a new PC to run a game smoothly. @ Rob currently working on getting my old xbox 360 flashed to play copied games and the right software to get it on xbox live without getting banned! Fixed my old 360 last week using the x clamp fix. It working perfect now, no more 3 red lights of death! :winky:

Clip of it on one of the lads at the dyno in March you can get it from Nengun