Andy-R

You could maybe get away with 1 bolt at either end and use the glue aswell mate, as there should be 2 bolt holes at either end of the spoiler? And if you drill the holes near the boot lip it could probably be covered up with a smaller spoiler if you do ever decide to remove it? Just pm'd you aswell mate about the templates :D Cheers mate i've got a plan for doing it, just replied to your pm :D

Defo bolting it on even if I have to do it myself, doesn't really matter if it's wonky does it

I bolted mine on it's abit fiddley but alot more secure still only took me 5-10mins, are the plastic clips things the same as the ones on the bootlid liner? just take a couple off that and use those for now but you should be able to get some from any motor factors :D

Probably got it somewhere matey but i'd have to trawl through my pm's to find it and there's a few off you if you could re-send it that'd be great, the way I see it make a template drill the holes if it's not quite right have another go you might get a few more holes in your lid but the spoiler will hide them and it's never coming off not while i've got the car anyway.

You any good with a drill Chris? i'd rather it was drilled but I think i'd have to do it myself and really don't fancy it, will have a word when I go to get it done if he won't drill then i'll have to make a decision weather to just take it away or trust the glue.

Quality was good matey it had a few marks on but I think that happened whilst being shipped.

I might be 170bhp what if it's got one of those magic chips you can buy off e-bay to boost the power and improve MPG

Just an update, still not sprayed he reckons he should be able to do it last job tomorrow and then leave it to air dry overnight as it can't be baked, one thing tho the guy fitting it want's to just glue it on is this ok i'd prefer him to bolt it aswell but I don't think he want's to drill the boot and I certainly don't have the confidence to do it myself, apparently the glues very strong and it'll be fine but i'm not 100% convinced

There's going to be a 2mins silence accross Merseyside tomorrow at 3.06pm to remember the 96 Liverpool fans who lost there lives at Hillsborough 20 years ago, I know many of you won't of been directly effected by what happend but if you can observe the silence and try and make it nationwide/worldwide that would be amazing, I without actually losing anyone in the tradgedy do have friends who where there and at this time of year football suddenly becomes un-important.

Fuel pump?

You mean you don't have one Andy ? :o Great to have you back Wozza

will see if i can get a couple sorted matey :D Have you got yours yet mate or is it next week you pick it up? (cant remember when you said you were picking it up) yep got mines just keeping it quiet. polished few pipes but going to do some tonight. polishing is hard on pipes lol. I found the pipes quite easy mate, but i put my drill in a vice to hold the drill and you just move the pipe backwards and forwards, A lot easier than trying to hold the pipe and the drill, plus you can put a bit more pressure on the pipe :D Look forward to seeing some pics of it fitted mate :D Will you 2 knock it off and stop rubbing our non s/c'd noses in it

Great to have you back on LOC my mate, not really missed you tho as we've been chattin on facebook Hope things pick up soon fella :D

:tsktsk: Chris some people do need a good kicking but it's probably better you went to the Rozzers ( as James May would say) at least now he and they know if someone damages cars again it's his door they'll knock on 1st even if he wasn't involved, not worth doing time for giving some low life a kicking even if it does make you feel better.

Simple matey, take wheel off clean with de-greaser and wire brush, mask up disk, I used hammerite direct to rust paint, couple of coats, lacquer if you want, decals not sure if anyone on here still does them if not e-bay but someone will tell you if you can get them off here still. Not red obviously but you get the idea.

Is there no end to your talents matey :D

Sorry but BUMP, for those who are interested it's now 18th May for new Eminem album :D

The missus uncle is a sprayer so taking it to him on Fri for him to spray when he goes back into work on Tue then one of his mates is going to fit it prob Wed or Thurs :D

Have a look at the on-line manual it should be on there.

BUMP, just an update the spoilers arrived today :D not taken it out to the car yet as I couldn't be bothered going to open the garage up but it looks very good and is very light, alot lighter than I thought so hopefully wont cause any boot opening problems, just got to sort getting it sprayed and fitted now :D

I'd go something similar to the colour of your car matey unless it's black then i'd go red :D

S :tsktsk: t matey people who do this need stringing up and setting fire to IMHO

Mines front o/s corner I'm pretty sure it's my front bumper tho as it's a little loose.

I thought that when I got mine, it was in a right state and I didn't really want the bother of getting it back to what it should be but then fell in love with it so sorted all the mess out, quite satisfying looking at it now and thinking what a state it was in, the only thing thats still bugging me is a small crease in the o/s/r wing but that's to big a job for me so it'll have to wait :D

Should of done the timing belt cover not really planning on doing the manifold covers tho, defo going to give the engine bay a good clean and need to move the ballasts aswell. Only really done this as it's a cheap easy mod but makes a big difference IMHO so as long as I keep it clean should look good for a while yet :D