Have a 2000 IS200 Sport, with the usual non working audio, so decided to install a new double din unit.
Purchased a JVC KW-XR811
All well and good me thinks, get a Bypass cable from Ebay job done or so i thought........
Wired up switched it on and nothing.. hmm but i could here it powering up when connected, but pressing eject lights up the unit as does pressing the display button if only for a few seconds. check everythings plugged in, check instructions, ah is some babble about modified wiring on the JVC loom which i try but that does nothing no power at all...
I then take a closer look at the leads...
This gets complex so bear with me! :duh:
The unit comes with a ISO lead with plugs into the back, and the other end into the bypass cable.
5 wires going into it red, black, blue/white, orange/white and yellow.
Lower connector in picture
but the end of the bypass lead that connects to this only has 2 wires yellow and a black.
top connector in this pic
Therefore no connection to the red wire which according to the instructions is "accessory terminal" so i presume that i have the wrpng bypass cable? but looking on ebay, obviously there is Non amp leads and Amp leads, and the end that connects into the amp connector is a long white one not the double one.
So am i doing something obviously wrong yet i can see it or have i the wrong lead?? I have searched through all the "relevant" threads but couldnt find a solution , any help would be much appreciated