-
Posts
27 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Tutorials
Lexus Owners Club
Gold Membership Discounts
Lexus Owners Club Video
News & Articles
Everything posted by tim1830
-
hi Stevet, as texas said, just had a little brown trouser moment as dvd player/software wouldn't read disc. spoke to sat nav store, who advised me to try a couple of things.neither worked. the new disc was fine, followed same procedure, and worked 1st time. again big thumbs up to them for great service the worrying bit was getting the disc out, on my 300 there's no eject button on drive, it's in a menu on the screen, which i couldn't get to as it was stuck on the disclaimer! had to jam the disc to stop it spinning and force an eject, not ideal. (had tried various methods, disconnecting battery, hidden screen buttons)
-
they asked me to disconnect battery again, and see if it ejected, it didn't. have tried to find hidden buttons from various forums, but to no avail. eventually tried the method of stopping the disk spinning, and letting auto eject, which it did. i'm just hoping i haven't damaged the unit? time will tell. so after all that, my experience hasn't been of an easy install. have re loaded the lexus disc, and all menus now working
-
well, now i really do need some help! followed instructions, battery disconnected for 15, and dvd won't read disc! Comes up with disclaimer warning, i touch i agree, and the checking disc, and then back to disclaimer. I can't eject disc, not sure what to do now. few web sites say about hidden eject feature, some about removing drive. any help would be greatly appreciated
-
at all the garages i've worked at the mechanics always agreed with this. they said that one thing people don't think of when letting their car warm up(engine), is that when they then pull away, is that nothing else is at a similar temp, most importantly the gearbox. a little mechanical sympathy for the 1st part of the drive is a much more effective way of warming the engine and gearbox
-
thanks bobmc, looking at vintages pics, i think i'll have a go, it's a great write up
-
just an update, and a question. headlamps working great, both height adjust as you turn ignition on, and not pointing at the floor, so all good. but ns headlamp is very cloudy, and i've been looking at polishing it to see if i can get it looking a bit cleaner. has anyone got any advice, or has anyone used the kits on ebay? with good results? thanks tim
-
thanks bobmc, all done the part was actually very reasonable, £350 for the double unit. seems to be working, but will take it out tonight in the dark. the worse thing? one shiny headlamp and one dull lamp. I did mention to the misses maybe i could change the other one, but i got the look!
-
so booked into Lexus Cambridge tomorrow for a new os headlamp, apparently the motor has seized/burnt out? and you guessed it, not available by itself. Lets hope this fixes the issue! tried ebay for a 2nd hand lamp, but the only couple in the uk for sale were only just a little cheaper than a new one fitted so don't feel quite as bad
-
just an update. local indy garage can't do it, they are not 100% sure which sensor or motor or ecu is causing the fault, and their computer can't find any error codes. instead of just guessing they suggested Lexus, and didn't charge me anything so that's ok i guess. Lamps would fail an mot on height, but no warning lights to say motor not working. Lets see what the dealer says?
-
hi Marty, has he explained the problem to you? is he waiting for parts, or tech advice? i'd start by just a phone call to check you're both happy with whats to be done, and to just confirm the price he quoted(just for your sake) tim
-
thanks Tiger, gonna book it in local garage, and see where beams point on MOT ramp, then they are going to check the level sensor on suspension to see if it's stuck. looks like they are hid, and no thumb wheel in car to adjust. fingers crossed it's not to expensive
-
Hi Tiger, yes to h/lamp wash, and no warning lights on. Seems to think it's ok? maybe it's just very low? I did try on the garage wall at home, and they don't seem to set. When i tried our rx400h the lamps bob up and down and set.
-
Hi guys, hope this is nearly in the right place? I wanted to get everyones advice if possible? My headlamps seem very low on dipped, dangerously low if i'm honest. I will check them against the wall tonight, just to see if they self level. As i drove in the night Fri, they were terrible. We happened to stop at a shop, where i got out and just bounced the front and rear of the car, and they seemed much better, and much higher. I will get the local garage to check them out,but was wondering if there should have been a warning? Apart from the obvious lack of vision lol My car is a gs300 2007
-
looks really good, the body kit sort of reminds me of something? mgb rv8? got a retro look to it
-
Gutted !!
tim1830 replied to is200 Newbie's topic in Lexus IS 250 / Lexus IS 250C Club / Lexus IS 220D & IS 200D Club
hi Noo Bie, is it worth asking the shop if they have cameras? or if it's a parking eye type of car park would they have a car leaving matching your pic at the same time with a clear reg? -
thanks guys, nice to meet you all. hopefully the questions i ask won't be to silly. although i did have to use the manual to find the hidden head rest button on the drivers side. will have a nose at the build sections, did see an interesting thread on audio, but that might be a little out of my league.
-
thank James. looks like a really good site. going to check out some of the sections as i get time at work.
-
both i'm sure!