Speed Pulse Signal For Navigation

[idmax]

Any one know where the speed pulse signal is located for the is200 se 2001, I need it to fit a navigation system, also question for steve audio, I want to use your motorized monitor with an Alpine DVD navigation system, the problem is the Alpine unit uses a remote control, I am assuming it takes the infrared signal from the Alpine screen, If I use you screen which is not Alpine how can I use the remote? Thanks in advance

[SteveAudioX]

The remote Data wire can be hard wired from the main RGB harness of the Alpine Nav unit to the monitor.

You can get the Speedo wire at the back of the dash clocks.

Red with Yellow trace.

[idmax]

I dont suppose you know of a more accesible place where the speed pulse can be found. Also I contacted alpine and they said a remote eye is available seprately which plugs into to the navigation unit so that will solve one problem. Thanks

[idmax]

I have been told you can also find it by the footwell, a blue/white wire, I have found this wire but is it the right one? Steveaudio when are your monitors going up fo sale, I need one!!