Do Not Sell My Personal Information Jump to content


Seat Base Rear Not Moving


Recommended Posts



does the motor run but no movement from the seat back ?or is it dead ? my 91 had a problem with only one side working turned out to be a rod from the motor that was stripped at one end,could it possibly be the same thing perhaps ??

Link to comment
Share on other sites

does the motor run but no movement from the seat back ?or is it dead ? my 91 had a problem with only one side working turned out to be a rod from the motor that was stripped at one end,could it possibly be the same thing perhaps ??

The seat back is fine. When I press the switch for moving the base of the seat up or down at the back nothing happens and there is no noise at all.

Link to comment
Share on other sites


Hi,

The 12 volt supply and earths are common to all seat adjustments and these must be present as you have some adjustments working.

There is a 16 pin connector to the seat motors ( don't know exactly where but have a look under the seat).

pins 11 and 12 go to the motor which does the slide function.

Check the connections and also the connections to the switch which controls seat movement.

Another possibility is a mechanical problem which has jammed the motor movement.

Cheers,

Steve

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...




Forums


News


Membership