Do Not Sell My Personal Information Jump to content


  • Join The Club

    Join the Lexus Owners Club and be part of the Community. It's FREE!

     

Connector Problem


Recommended Posts

Hi,

I got Xenon effect bulbs for my fogs an got my garage to fit them in. The only problem is the conector/bulb holder for the passenger side is different than the rest, is that normal?! The bulb i have will not fit in that holder, its fitted fine on the driver side. Does anyone know where I could get this bulb holder? Or what the part number/ID is? I hope I haven't confused anyone if ive not explained the part right. Its a brown clip thing into which the bulb fits into.

my lexus is a V reg 2000 model is200 SE Auto.

Any suggestions??

Thanks in advance :)

Link to comment
Share on other sites

Hi,

I got xenon effect bulbs for my fogs an got my garage to fit them in. The only problem is the conector/bulb holder for the passenger side is different than the rest, is that normal?! The bulb i have will not fit in that holder, its fitted fine on the driver side. Does anyone know where I could get this bulb holder? Or what the part number/ID is? I hope I haven't confused anyone if ive not explained the part right. Its a brown clip thing into which the bulb fits into.

my lexus is a V reg 2000 model is200 SE Auto.

Any suggestions??

Thanks in advance :)

They should be indentical on both sides, maybe previous owner had to replace it for some reason or else yours has melted due to water damage maybe. I'll try get you a part number for it from my mate that works in Toyota.

Link to comment
Share on other sites

Hi,

I got xenon effect bulbs for my fogs an got my garage to fit them in. The only problem is the conector/bulb holder for the passenger side is different than the rest, is that normal?! The bulb i have will not fit in that holder, its fitted fine on the driver side. Does anyone know where I could get this bulb holder? Or what the part number/ID is? I hope I haven't confused anyone if ive not explained the part right. Its a brown clip thing into which the bulb fits into.

my lexus is a V reg 2000 model is200 SE Auto.

Any suggestions??

Thanks in advance :)

They should be indentical on both sides, maybe previous owner had to replace it for some reason or else yours has melted due to water damage maybe. I'll try get you a part number for it from my mate that works in Toyota.

Part number should be: 90980-11096

Link to comment
Share on other sites

Hey thanks a lot man!! Well wen i got the car the fogs didnt work, got garage to check it was heated an melted an all sorts, but the connector thats attached to the wire is fine, wire was a bit loose but guy fixed it, but it was just the whole fitting, the 9005 bulb which is the same as 9006 cannot fit into that holder on that side as it has like a completely different design to the rest of the holders on the car, its like a big fat chunk inside an it just takes a different bulb, i duno the bulb number as its currently fitted and i cant get into it without ramping it up.

But hey, thank you very much! I will fone lexus and ask if they can supply me with this or even do a search online. Thanks a lot man, i appreciate it.

Im glad people have these forums, it is very helpful :)

Cheers again mate

Link to comment
Share on other sites

Hey thanks a lot man!! Well wen i got the car the fogs didnt work, got garage to check it was heated an melted an all sorts, but the connector thats attached to the wire is fine, wire was a bit loose but guy fixed it, but it was just the whole fitting, the 9005 bulb which is the same as 9006 cannot fit into that holder on that side as it has like a completely different design to the rest of the holders on the car, its like a big fat chunk inside an it just takes a different bulb, i duno the bulb number as its currently fitted and i cant get into it without ramping it up.

But hey, thank you very much! I will fone lexus and ask if they can supply me with this or even do a search online. Thanks a lot man, i appreciate it.

Im glad people have these forums, it is very helpful :)

Cheers again mate

No bother mate you dont need to put the car up on a ramp to get at the fog bulbs, you can get to the fogs if you remove the whell arch liner. Theres some plastic pop screws that you need to take out first them just gently pull the liner towards you. You shouldnt be paying people to change your light bulbs!

Link to comment
Share on other sites

Latest Deals

Lexus Official Store for genuine Lexus parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






Lexus Owners Club Powered by Invision Community


eBay Disclosure: As the club is an eBay Partner, the club may earn commision if you make a purchase via the clubs eBay links.

DISCLAIMER: Lexusownersclub.co.uk is an independent Lexus forum for owners of Lexus vehicles. The club is not part of Lexus UK nor affiliated with or endorsed by Lexus UK in any way. The material contained in the forums is submitted by the general public and is NOT endorsed by Lexus Owners Club, ACI LTD, Lexus UK or Toyota Motor Corporation. The official Lexus website can be found at http://www.lexus.co.uk
×
  • Create New...