Will Supra Alloys Fot My Gs300

[Reece.Haswell]

By fot mean fit lol

As title really guys Ive seen some nice alloys

Stud diameter 114

FRONT WHEEL SIZE 18" X 8.5J WITH 235-40/ZR18 TYRES

REAR WHEEL SIZE 18" X 9.5J WITH 265-35/ZR18 TYRES

offset is 35?!!

These are being sold by a guy with a supra who is selling as it doesnt fit over his bigger calipers. Will they fit my 1999 GS300 Navigator (before I buy them and realise they dont fit and/or to wide etc

[TigerFish]

Is the offset 35 for fronts and rears?

[Reece.Haswell]

Is the offset 35 for fronts and rears?

I kinda assumed it was for all 4? obviously not, are they different?

[TigerFish]

Is the offset 35 for fronts and rears?

I kinda assumed it was for all 4? obviously not, are they different?

They could all be the same, but you would need to make sure so that it can be calculated correctly if they will fit.

[Reece.Haswell]

Is the offset 35 for fronts and rears?

I kinda assumed it was for all 4? obviously not, are they different?

They could all be the same, but you would need to make sure so that it can be calculated correctly if they will fit.

Ive mailed him, would it be ok to drop yo u a pm when he gets back as you seem to know what your talking about lol

[TigerFish]

Yup, no problem.

[TigerFish]

For extra info, the offset for mk1 Sport 18x8" front wheels is 40, and for the 18x10" rears is 46. The front tyres are 245/45/18, the rears 275/35/18. The link below is too an offset calculator, so you can enter the above info, then the new wheel info, and it will tell you how the new combo will sit compared to the old. I have the above wheels on my 1999 GS300 Sport and they fit spot on.

Click here

[TigerFish]

By my reconning, with an offset of 35 front and rear:

The rears would stick out 5mm more than my sport wheels in the arches, and clear the strut behind by an extra 17mm compared to the Sport wheels. Should get away with the 5mm.

The fronts would stick out an extra 11mm, and get 1mm closer to the strut. I'm not sure I'd go with them myself, 11mm sounds a bit too close for comfort for me. but I could measure the clearances with a tape measure on mine to give a more accurate summary.

[Reece.Haswell]

Could you measure yours for me please mate, I really like the look of these alloys :) sorry to be a pain