Vacuum

[GXE10]

hi, can someone tell me where can i find a breather hose from the plenum chamber or the manifold or the vacuum servo hose from the brake servo in a 98 MK2 Gs300??

i want to fit a ECOTEK into my GS300, anyone had any experience with them?

[ColinBarber]

They make a noise and do nothing except possibly make your engine run lean! You also need two for a 3.0l engine.

[GXE10]

no one can help me with this question?

[Monster-Mat]

obviously the advice Colin gave you isnt enough.

i second with him, dont bother with an ecotek, there not worth it

[james2210]

Don't know if this is what you are looking for. If you remove the black cap (labelled on the attached photo), you will find a source of vacuum that goes directly into part of the inlet manifold.

Please don't blame me if you cause some damage to your motor by fitting one of these Ecotek things. Quite frankly, the idea of attaching anything to the brake booster vacuum sounds nuts. At the very least it could reduce braking power. Anyways, I don't think (correct me if I'm incorrect) that the GS300 has a vacuum assisted brake servo-I think it's electrically pumped.

Hope this helps