Do Not Sell My Personal Information Jump to content


Monster-Mat

Management
  • Posts

    17,446
  • Joined

  • Last visited

 Content Type 

Profiles

Forums

Events

Store

Gallery

Tutorials

Lexus Owners Club

Gold Membership Discounts

Lexus Owners Club Video

News & Articles

Everything posted by Monster-Mat

  1. yup been running staggered for many years now
  2. on the is200 if you disable the airbag it shuts the whole system down, you can not use a resistor in the system, i have tried all options in the past, in the end i removed the airbag system you can only use a resistor mod on the seat airbags
  3. my centrecaps came with the TE37s when they were shipped from japan, they are an aluminum disc with sticky tape on the back
  4. the one on my car is made by HKN from Japan
  5. increasing the size of the intercooler doesnt increase boost pressure, assuming you have the most effective designed intercooler for your engine specification, you would see, no pressure drop, but the density of the air would increase, not the pressure other than that, you have sure been on a shopping spree
  6. the correct seat runners can be got from japan, not cheap, but will fit perfect
  7. how odd...all the drop links on my is200's have the allen socket
  8. where the nut that holds it to your ARB, goes through the suspension component, the end should have an Allen socket (female) you need to use the Allen bit to hold the threaded part to undo the nut you can see the Allen recess on your picture, at the end of the threaded part
  9. as you know the paint code just get that code paint from halfords............ however...... as you didnt know that you need to match the paint codes, are u sure you will be able to paint, and do a good job of painting the bumper
  10. they are held on with x2 self tapping screws, you can try replacing it with a small screwdriver, or best is to remove the washer unit from the car
  11. rear subframe or front?, im after a rear
  12. W58 box will fit though what condition is the subframe in?....only need the frame nothing else
  13. i know...was just letting you know that the is200 ones will fit, you usually find them complete
  14. the is200 manual gearbox and is300 engine cannot be fitted together
  15. its part of the pump assembly, so to remove it, remove the factory pump
  16. nope the altezza doesnt have an immobilizer fitted
  17. yes i have the number, but you cannot order from TTE you can only order the parts from the dealers
  18. you can only order parts through the dealer, not direct from Cologne
  19. works on vacuum, why do you want to keep it open all the time?
  20. torque damper wont...and isnt needed
  21. sxe10 is the chassis code it means they should fit the is200 and altezza
×
×
  • Create New...