-
Posts
1,989 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Events
Store
Gallery
Tutorials
Lexus Owners Club
Gold Membership Discounts
Lexus Owners Club Video
News & Articles
Everything posted by J Henderson
-
Watched the new 4K UHD version of ALIENS last night.
-
The centre bore can be larger than 60.1mm, but not smaller. Most aftermarket wheels have a bore size of 73.1mm. In this case, you can fit a set of hubcentric spigot rings to reduce the bore size down to the required 60.1mm. Also be aware you'll probably need new wheel nuts too, as the standard (flat seat) Lexus nuts are no good with aftermarket wheels. As for sizes, 8" wide with an ET around +40 is a pretty nice and safe fitment. I personally had this setup on my IS200 thanks to IS250 wheels and 5mm spacers, and was pleased with how it looked.
-
Sounds like the tyres hopping/skipping. Quite normal and nothing to worry about. With lots of steering lock applied, the front wheels on these cars are in a positively cambered state, and effectively only using the outside edge of the tyre. Almost like the car is tiptoeing. Cold tyres are typically not yet pliable enough to cope and tend to hop & skip when performing a full-lock manoeuvre. This is more likely to happen with "sporty" tyres which have square-ish tread blocks on the edge. I think having larger wheels also exacerbates the issue as I suffered this a lot when I had 19" wheels.
-
Does a screen replacement also not require something else - such as the plastic trims either side of the glass, or some clips or whatever to be replaced too? I'm sure I've read on here about people having issues when a windscreen was replaced and the old stuff was re-used? In any event, John. Check your insurance policy details. You might be able to insist on a Lexus windscreen being fitted. I know my policy has a separate excess payment for a "non approved" glass replacement.
-
Full disclosure - not my mirror! The picture is off the Internet. Who knows though, mine might actually look similar as I also suffer from this issue. Haven't had my mirrors apart since 2017 though to confirm. I find the streaks clean up quite well by going over them with a clay mitt. Having a silver car, I can get away with doing just this without having to polish out any marring caused by the claying process.
-
This is caused by corrosion on the aluminium parts inside the mirror. Any water inside the mirror casing interacts with it and causes those milky deposits to develop. Unless there's a product that could somehow "seal" the metal to prevent it from happening (maybe painting them with something?), I'm not aware of any possible fix outside of replacing the parts in question.
-
-
Filters....
J Henderson replied to HighlandJohn's topic in Lexus IS 250 / Lexus IS 250C Club / Lexus IS 220D & IS 200D Club
-
Welcome. Certainly looks like Windsor Blue. The paint code 8U0 on your VIN plate in the passenger door shut will confirm.
-
Yeah, the two opposing surfaces (aluminium & steel) bond together pretty good over time. I got a garage to replace mine. First one went in 2021, then the other side lasted until 2023.
-
Imported ISF
J Henderson replied to jeffrosie6's topic in Lexus F Club - Lexus IS-F / GS-F / RC-F Club
-
Limiting the top speed to protect the MGU seems plausible, but Lexus doesn't appear to do this with "bigger" cars like the GS450h or LC500h. They'll do 155mph if required. On a related subject, I caught the tail end of an old Top Gear episode the other day, where Clarkson was driving the then-new Nissan GT-R, in Japan. That car was also limited to 180km/h like everything else, but interestingly, the limit was removed when the car knew (via it's navigation system) that it was on the Fuji Speedway racetrack.
-
Tyre thoughts?
J Henderson replied to larryadler's topic in RX 300 / RX 350 / RX 400h / RX 200t / RX 450h Club
I fitted tyres for a while when I was a lad and plug repairs are perfectly fine. I would actually prefer this repair method over a normal patch since the stem of the plug also fills out the entry wound. Meaning there's less chance of the steel belts inside the carcass getting corroded from water ingress. -
Road tax
J Henderson replied to Spark plug's topic in Lexus IS 250 / Lexus IS 250C Club / Lexus IS 220D & IS 200D Club
Same price as last year, no? I renewed mine in August last year for £365, and according to what I've read, the price on April 1st, will also be £365. I agree though. The money should be spent on the roads. -
JLR said they fixed their cars - did they?
J Henderson replied to Linas.P's topic in Lexus General Discussions
Mental how JLR themselves didn't even want to insure one of their own cars. 🤣 -
E10
J Henderson replied to Zuke's topic in Lexus IS 250 / Lexus IS 250C Club / Lexus IS 220D & IS 200D Club
The fuel pump, or parts of it are more likely to corrode or fail due to the higher ethanol content. Have a read through This Thread for the specifics. -
Just renewed mine a few days ago. Price had gone up by 14% to £279, which didn't seem too bad compared to some of the shocking quotes I've seen mentioned on this forum recently.
-
Welcome 🙂 Do you have 2 keys or just the one? I'm sure you're worrying over nothing, but you could maybe put the key in the centre console and just watch the person whilst they work. Should only take about an hour at most. £410 to update the maps? Sheesh, I would put that on hold indefinitely. When I first got my car I was told it would be circa £200 and I was loathe to pay that much. Better off using free apps like Google maps or Waze.
-
Sure, the fronts are definitely an upgrade. 4 piston monobloc AVICS calipers & 334mm discs vs single piston caliper/carrier setup (slide pins) & 296mm disc. But the rear brakes are the same on IS250/IS350/GS300 - 310mm vented. You mentioned sourcing GS calipers for the rear, hence why I said you already have those. "GS brakes" on the rear would only be an upgrade on an early car with solid discs. Edit: beaten by Colin 🙂
-
The rear brakes on a GS are exactly the same as what you already have on a 2010 IS250, so that wouldn't be an upgrade. As for needing new discs and pads. You might get away with cleaning the disc up, but new pads will probably be needed. Usually, when a caliper has been sticking, one of the pads gets heavily worn down compared to the other.
-
Help! I messed up my headlight restoration
J Henderson replied to lonesy's topic in Lexus Car Care & Detailing
What kit did you use? I'm guessing that its maybe too cold for the product to have cured properly.