Altezza De Cat Centre Section

[AltezzaScott]

OK, who is interested in a de-cat centre section for there RS200 Altezza?...

Would be stainless steel naturally and cost about £150

this would have to be replaced by the standard cat come MOT time, but this is only 4bolts and will only take 30mins max...

[Sirnixalot]

2 questions

1) would this have a resonator in it?

2) what diameter piping would you be using? (im assuming 62.5mm/2.5")

I'm a crazy ***** an would like to get one without a resonator but if thats not possible then you can count me in (if you can ship to the Cayman Islands)

[AltezzaScott]

2 questions

1) would this have a resonator in it?

2) what diameter piping would you be using? (im assuming 62.5mm/2.5")

I'm a crazy ***** an would like to get one without a resonator but if thats not possible then you can count me in (if you can ship to the Cayman Islands)

←

wouldn`t sell many without a resonator mate... would be too loud...unless i get 5 interested? :D

piping would be 2" or 2.25" i guess

[Sirnixalot]

wouldn`t sell many without a resonator mate... would be too loud...unless i get 5 interested? :D

piping would be 2" or 2.25" i guess

←

Fair point on the resonatorless ones, will they be straight through, as in no baffles? 2 or 2.25 " would actually be a step down from the stock piping size.

Stock piping is 2 3/8 inches or 60mm. That being said the fujitsubo and kakimoto center sections are both 60.5mm/2 3/8"

[AltezzaScott]

wouldn`t sell many without a resonator mate... would be too loud...unless i get 5 interested? :D

piping would be 2" or 2.25" i guess

←

Fair point on the resonatorless ones, will they be straight through, as in no baffles? 2 or 2.25 " would actually be a step down from the stock piping size.

Stock piping is 2 3/8 inches or 60mm. That being said the fujitsubo and kakimoto center sections are both 62.5mm/2.5".

←

can have them made in 2.5 if you want, but thought this might loose inital torque?...

and NO there won`t be any baffles... posting to you would be a pleasure!!

[Sirnixalot]

i misquoted fujitsubo's figures. They reuse the stock sized piping but remove the cat.

60.5mm is what they use. I dont see any torque loss happening since you will be reusing the same size piping minus the cat.

I had a bit of pipe welded inplace of my cat, i felt no loss of torque but a big difference in top end power. the exhaust was a little louder as well.

[AltezzaScott]

i misquoted fujitsubo's figures.  They reuse the stock sized piping but remove the cat.

60.5mm is what they use.  I dont see any torque loss happening since you will be reusing the same size piping minus the cat.

I had a bit of pipe welded inplace of my cat, i felt no loss of torque but a big difference in top end power.  the exhaust was a little louder as well.

←

how many you wanting then mate... looks like only me and yopu having them!

[Sirnixalot]

LOL...i only need 1. I can ask some people localy but they are more interested in body kits and slapping the Lexus badges on them.