Illumination For Motorised Nav Housing Buttons

[psl]

Hi All

Just retroffited a 6" nav into a motorised nav housing. Thanks to these forums, I have eveything working (opens, closes and tilts) but cannot get the open close and tilt button to illuminate when the lamps are on at night. Anyone know which wires to tap into the radio cd or seat heaters harness?

[sparkystav]

do they ever illuminate?

[Parthiban]

do they ever illuminate?

I think the buttons illuminate.

[DimitrisTS]

They DO illuminate.

If i remember correctly you have to give power to the pin up or down from the pin you already give power for the motor.

[clifton 94]

Hi All

Just retroffited a 6" nav into a motorised nav housing. Thanks to these forums, I have eveything working (opens, closes and tilts) but cannot get the open close and tilt button to illuminate when the lamps are on at night. Anyone know which wires to tap into the radio cd or seat heaters harness?

hi just done the same what pin in the back of the sat nav did you power up to light up the switches cheers tony

[clifton 94]

Hi All

Just retroffited a 6" nav into a motorised nav housing. Thanks to these forums, I have eveything working (opens, closes and tilts) but cannot get the open close and tilt button to illuminate when the lamps are on at night. Anyone know which wires to tap into the radio cd or seat heaters harness?

hi i took a wire from the heater controls small connector green wire to the connector above the earth wire on the sat nav i have the early sat nav and my car is a 2001 best to check with a electric meter first hope this helps