Rear Spoiler And Lights

[Sterling]

I like the look of the boot spoiler but struggle to find it available in the UK. Here is one from USA that is what I want. Does anyone know where this can be bought at a reasonable price in the UK ?

http://www.ebay.co.uk/itm/180898987085 Under £100 painted and delivered

Also I prefer the rear lights from the facelift (2009+) IS. Are these a direct replacement for the originals or would I have to do some modifications?

Thanks, Kenny

[rd27]

Hello there, i've done both mods you've mentioned.

Here's a link for the spoiler I bought, £80, free delivery and I had to pay £20 import tax. I couldn't recommend it enough really, delivery time was quoted of up to 30 days but I recieved mine in 4, that's right, painted and delivered from Taiwan in 4 days - efficient. The paint job is also brilliant, good colour match and very few imperfections, I have a very keen set of eyes and I was pleased.

http://www.ebay.co.u...984.m1497.l2648

With regards to the facelift rear lights, I too have done this mod, the lights are interchangeable, the plugs for the wires and the bolts are in the same place. However, the shape of the bootlid behind the lights is a different shape, requiring some cutting of the bootlid behind where the lights sit - not for the faint hearted. I've replaced just the inner lights so far (with the flick shaped reverse light section) these seem hard to get hold of, taking me a good few months of checking eBay to find them. I'm not sure how interchangeable the outer lights are, i'm still waiting for some to come up, using a combination of new and old is fine for the time being but the shut lines aren't exact and i'm very anal about shut lines (typical Lexus owner, the persuit of perfection and all that)

Hope this helps. =D

Pictures:

[Sterling]

Thanks for the info. How much of the boot lid did you have to cut? How did you do it? How did you treat the exposed metal? Did you take any pis of the cutting process?

[wicked677]

Sorry to bump an old thread but were you able to tell us more about the cutting process? thanks.