jay_russell

i got loads of these from work....

hi i got loads of these ... they are only 2 button units but they are oem units

so sorry. that kills me to hear how much they charge.... i work for Toyota in Sweden so buying a Lexus is200 was a good think as parts are cheap for me.... got my service done for 50 pounds with everything changed. my big one is coming in a year but that's going to set me back about 200 pounds.. try a Toyota garage or as they say a nice little garage that prides them self on good workmanship

i work in the tire shop for toyota and they are ok..... have them on my 20" with no problems at all here is a photo.... cant see so great but they are there

i read the posts on here and a question.... does the fcd have to be 4 wires or can the is200 use a 3 wire unit....

not a bit and i lowered it by 35mm and have 20"

let me know what you want to do... i can try one for you if you want... or?

i like that bazza....... is200 with kompressor 120 mph all day but i bet it was not as much fun before you got the kompressor getting to 120 mph.... we love power and we love speed... we will make them go warp speed

can't wait to put my turbo in and leave the old is200 underpowered horse and cart behind... still love the car

get them on ebay cheap

i got 20" on mine no problems. it was a hard ride but lowered it with tte springs and it's a lot softer.

no i think you miss understood me, you need to get yourself a valet key... they don't cost so much because they are just the key then you can send me the master and the blank one and i can program it at work but lets hope that the new info you get from the seller works.... you can post it here later for others to find..... but we have loads of 2 button units that work on lexus so if they can be programed to work with your car just like this one http://cgi.ebay.co.uk/lexus-blank-Key-2-bu...=item19b7f75054 i just have the button units at work

you can send me the master key and one other and i program them at work. dont sell them just yet as there may be a reason why they are not working... i can check if we have any 3 button units at work.... and send you one of them.... or i have 100's of 2 button ones that work the same as the 3 button ones without the boot open. i can send you one of these for you to program up and use.... let me knw what you think.... sent the last one i had at home to a loc member last week

no it's not me as i'm in sweden..... work for toyota so i know nothing about how to program a key using the car... have the programmer at work.

these is a little problem with it.... first you have to take your key apart and place the button unit under the barrel of the lock to kill the imobilzer and for engine start you need to conect up oil sensor and this system runs on a special multi link system.... meaning there is one wire but 4 sensors using it at the same time..... i looked into this myself and i work for toyota and checked it out with our lexus mechanic and he said he would not touch it because of the multi link system... hence the reason it's going in the girlfriends car and not mine.... good luck

here are a few i found good luck and if nothing works ask for help again

To make your Lexus remember your key's wireless signal: For the remote part in drivers seat WITH DOOR OPEN. Start with door unlocked. 1. Put master key in ignition, turn to on, then back off and remove. 2. Using the lock/unlock button on drivers door. press lock.. then unlock 5 times.(lock,unlock,lock,unlock,lock,unlock,lock,un lock,lock,unlock) 3. Close drivers door, open drivers door. 4. Perform lock/unlock procedure again. DO NOT close and open drivers door. Just the lock/unlock procedure again. 5. Insert NEW key in to ignition and turn to on, then back off and remove.(at this point the doors should lock and unlock by themselves ONCE) 6. Now press both lock and unlock buttons on REMOTE. Release after about 1.5 seconds. 7. Now press just the lock button on remote. once you press the lock button, the car should lock and unlock ONCE, if it lock unlocked TWICE you messed up somewhere. 8. Now open and close the drivers door a couple times to close programming. if you did it right, remote will now work."

1. Start with the driver's door open. 2. Insert a working Master Key (3 button) in to ignition, turn to on, then off and remove. 3. Lock, then unlock all the doors using the POWER LOCK button on the drivers door FIVE times (lock unlock lock unlock lock unlock lock unlock lock unlock) 4. Close drivers door, then re-open. 5. Lock, then unlock another FIVE times, exactly as before. 6. Insert your new key into the ignition and turn to on, then off again and remove. 7. The door locks will then start operating. 8. While they are clicking away,hold down the lock button on the new key and press the unlock button on the key 5 times. Then release and press unlock button once. 9. The doors will lock and unlock once...and you're done!

here i copied this from another site so i hope they dont mind..... if so sorry but just trying to help a friend out so a big thanks to lexusboy Here one example but can not say it works, as i not tried it For 1998+ Toyota, Lexus Add Duplicate Key 1. Simultaneously depress and release brake and accelerator pedals 1 time. 2. Insert existing master key into ignition. 3. Within 15 seconds depress and release accelerator pedal 5 times. 4. Within 20 seconds depress and release the brake pedal 6 times and remove key. 5. Within 10 seconds insert new key into ignition. 6. Within 10 seconds depress and release the accelerator pedal 1 time. 7. After 80 seconds new key is registered and security light goes off. 8. Remove new key and depress and release brake pedal 1 time. For 2002+ Toyota, Lexus Add Duplicate Key Requires one working Toyota/Lexus Master Key. 1. Make sure all doors and windows are closed. 2. Insert Master key into the ignition cylinder. 3. Cycle the ignition cylinder from On to OFF five times. 4. Open and close the “driver side” door 6 times. 5. Remove the Master Key and insert the new duplicates key. 6. TURN THE IGNITION CYLINDER ON. 7. The new key will be registered after 60 seconds. The THEFT light on the dashboard will go out, indicating that programming has been completed. 2ND VERSION SLIGHTLY DIFFERENT To program the immobilizer bit of your new key: First, have your new key cut. Then: For 1998+ Toyota, Lexus Add Duplicate Key 1. Simultaneously depress and release brake and accelerator pedals 1 time. 2. Insert existing master key into ignition. 3. Within 15 seconds depress and release accelerator pedal 5 times. 4. Within 20 seconds depress and release the brake pedal 6 times and remove key. 5. Within 10 seconds insert new key into ignition. 6. Within 10 seconds depress and release the accelerator pedal 1 time. 7. After 80 seconds new key is registered and security light goes off. 8. Remove new key and depress and release brake pedal 1 time. To make your Lexus remember your key's wireless signal: For the remote part in drivers seat WITH DOOR OPEN. Start with door unlocked. 1. Put master key in ignition, turn to on, then back off and remove. 2. Using the lock/unlock button on drivers door. press lock.. then unlock 5 times.(lock,unlock,lock,unlock,lock,unlock,lock,un lock,lock,unlock) 3. Close drivers door, open drivers door. 4. Perform lock/unlock procedure again. DO NOT close and open drivers door. Just the lock/unlock procedure again. 5. Insert NEW key in to ignition and turn to on, then back off and remove.(at this point the doors should lock and unlock by themselves ONCE) 6. Now press both lock and unlock buttons on REMOTE. Release after about 1.5 seconds. 7. Now press just the lock button on remote. once you press the lock button, the car should lock and unlock ONCE, if it lock unlocked TWICE you messed up somewhere. 8. Now open and close the drivers door a couple times to close programming. if you did it right, remote will now work." Good luck

you can open up your working key and put the button transponder from your master key into the new cut key and see if it's working. you can replace the battery in the new keys to be 100% sure they are good

go get your self a valet key cut for a few quid and use that for now and if you send them to me in Sweden i will get them both programed for you for the cost of posting them back to you..... but there is a guy called ormi on here and he works at a Toyota in the UK so he can probably do it over there. they use the same programmer for Lexus / Toyota good luck

yes there is. but if i remember right you hock them up to a unit the same as you do with your mirrors..... not sure but i think you can use the same unit.... but dont quote me on that

people can't help them selves because the is200 is one of the nicest looking saloons even 10 years on people still look at them in awe.... soak it up and think of them as the awe admiring classes

yes but why would you... lexis immobilizer is the best

have you got the valet key or one other that works...?