Hi, I do not really have any idea about cars at all, upon starting my car this evening (lexus is220d ) 2007 I got the vsc error and turned on the engine and Tc lights. Would this be from a filter problem, I have had no problems before. It is due for a service in 2k (currently 80k)
would you recommend to call the road side assistance and ask them to define the fault or to take it to a garage or a dealership and ask them to asses
any help is much appreciated
I wonder if anyone can shed any light on an issue I am having with my 2005 RX300... please?
I noticed a little while ago that, occasionally, under normal (not harsh) braking at low speed, or under normal (not harsh) acceleration from standstill, either the ABS or Traction Control would kick in.
The ABS "effect" seemed to be coming from the off-side front and so at a recent service I asked the garage to check the ABS rings and examine whatever they could get into, on all four corners. This they did and reported that everything appeared as it should be.
More recently, I was advised that the issue could be a dirty ABS/Speed Sensor (maybe a small piece of road dirt or debris had become lodged etc...) and that if it could be removed it might be cleaned, however, they also had a tendancy to break if not having been removed before and so the best course of action would be to buy a new one and change it completely. This I did and the work was completed just a couple of hours ago ...and I can report that it most definitely appears that the offside front was the culprit because now, pretty much every time I pull away, the Traction Control kicks in!
The only thing that has been changed was the sensor (Part Number checked before purchase and fitment), so I can only assume with a new sensor in place the issue has become more apparent.
So, can anyone offer me any advice as to what to do next?
Is it worth going ahead and changing the sensor ring, just in case, or has anyone else experienced this and has a "fix" that works?
Any help/advice/assitance would be greatly appreciated.
Hi, new to forum, there may be an already existing thread but I cannot find anything......ANYWHERE! I need an ecu pinout for a 2001 is200 using a 1gfe with an ecu number 89661-53200. I need this pinout diagram and expertese to fit a bee*r limiter basically because I want one and I like being a loon in my car. There are people who hate/disagree with them, however I would like one in my car and I would appreciate help fitting it.
any help appreciated.