IS250 clutch replacement - Tips, things along the way

[CallumH]

Hi all,

I am replacing the clutch in my 2006 is250 with a spec stage 2+ and spec solid flywheel very soon. Parts are ordered on route from JM imports. Very helpful guys if anyone needs anything, worth contacting them.

Just wondering if there is anything worth replacing along the way that I should order now? I dont want it stripped down on a ramp and then find out theres a common thing worth doing and miss the opportunity to replace them with the box being out.

Thanks for any advice

 

 

[steve2006]

Hi Callum and welcome to the LOC.

The only thing I would consider while the box is out is perhaps replacing the rear main seal.

[CallumH]

Hi Steve,

Thanks! I have ordered it and will replace as well, cheers for the advise.

[AFlex]

On 10/11/2020 at 9:35 PM, CallumH said:

Hi all,

I am replacing the clutch in my 2006 is250 with a spec stage 2+ and spec solid flywheel very soon. Parts are ordered on route from JM imports. Very helpful guys if anyone needs anything, worth contacting them.

Just wondering if there is anything worth replacing along the way that I should order now? I dont want it stripped down on a ramp and then find out theres a common thing worth doing and miss the opportunity to replace them with the box being out.

Thanks for any advice

 

 

Have you also thought about doing the clutch delay valve delete? This guy on the US forums (Jeff Lange) did this and said it felt much better after